Jump Leads - Toolzone - 1200 Amp - 5m
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone who needs reliable jump leads for boosting vehicles. The Toolzone 1200 Amp, 5-meter jump leads provide a strong and secure connection, making it easier to start a vehicle with a dead battery. A key caveat to remember is to always connect the leads in the correct order to avoid damage.
All features
| Model Part Number | KDPAU320 |
|---|---|
| Brand | Toolzone |
Extended Product Information
FAQs
What is the correct order to connect the jump leads?
Connect the positive (red) clamp to the positive terminal of the dead battery, then connect the other red clamp to the positive terminal of the working battery. Next, connect the negative (black) clamp to the negative terminal of the working battery, and finally, connect the other black clamp to a grounded, unpainted metal surface on the stalled vehicle, away from the battery.
What should I do if the jump leads spark?
If the leads spark excessively, disconnect them immediately and recheck the connections. Make sure that the clamps are securely attached to the terminals. Ensure the correct order has been followed.
Can I use these jump leads on a motorcycle?
Yes, provided the motorcycle has a 12V battery and the amperage rating is sufficient. Ensure that the clips fit securely on the terminals.
How long should I let the working vehicle run before trying to start the dead vehicle?
Allow the working vehicle to run for at least 5 minutes to allow the dead battery to receive a charge.
How should I store the jump leads?
Store the jump leads in the provided zip case in a dry place to prevent corrosion and damage to the cables.
What do I do after the car has started?
Once the stalled vehicle has started, carefully disconnect the jump leads in reverse order of how they were connected. Start with the negative clamp on the stalled vehicle, then the negative clamp on the working vehicle, then the positive clamp on the working vehicle, and finally, the positive clamp on the stalled vehicle. Let the vehicle run for a while to recharge the battery.
What are the key safety precautions when using jump leads?
Always wear eye protection. Ensure the vehicles are not touching. Avoid leaning over the batteries when making connections. Never connect the negative lead to the negative terminal of the dead battery.
What if the jump leads are too short?
If the jump leads are too short, reposition the vehicles closer together or consider using longer jump leads. Do not stretch the leads or force the connections.
Troubleshooting
Vehicle won't start after using jump leads.
Double-check the connections, ensuring they are secure and in the correct order. Make sure the working vehicle is running and has been running for a few minutes before attempting to start the vehicle with the dead battery. The clips should have good contact with the terminals. If the problem persists, the battery may be beyond help, or there might be an issue with the vehicle’s starter or electrical system.
Jump leads are sparking when connecting.
Ensure the leads are connected in the correct order. If the sparking is excessive, disconnect the leads and re-examine the connections. Make sure that the clips are making a good connection with the terminals. If the problem persists, there might be a short circuit or other electrical issue in one of the vehicles.
Pros and Cons
Pros
- High amperage suitable for various vehicles.
- Long cable length for convenient reach.
- Strong and insulated clips for safety.
- Comes with a storage case for easy organization.
- Designed for low voltage drop, ensuring efficient power transfer.
Cons
- Requires proper connection sequence to avoid damage.
- May be bulky to store depending on space availability.
- The weight might be considerable due to the robust build.
Setup, Compatibility & Care
- Connecting the Leads: Always connect the positive (red) clamp to the positive terminal of the discharged battery first, followed by the positive terminal of the good battery. Then, connect the negative (black) clamp to the negative terminal of the good battery and the other negative clamp to a grounded, unpainted metal surface on the stalled vehicle, away from the battery.
- Compatibility: These jump leads are compatible with vehicles that have 12V or 24V batteries. Ensure the amperage rating meets or exceeds the requirements of the vehicle you are jump-starting.
- Care and Maintenance: Store the jump leads in the provided zip case when not in use. Regularly inspect the clips and cables for any signs of damage or wear. Keep the clips clean and free of corrosion to ensure a good connection. Avoid excessive bending or twisting of the cables to prevent internal damage.