Draper Expert Hi-Torq 6 Point Socket - 1/4"" Sq. Dr. - 8mm - Draper Tools
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Draper Tools Hi-Torq 6 Point Socket, providing essential information for effective use. The key benefit is the socket's durability and grip, thanks to its chrome vanadium steel construction. Keep in mind that this specific model is an 8mm socket with a 1/4" drive. This guide covers setup, best practices, and troubleshooting to help you get the most out of your Draper Tools socket.
All features
| Model Part Number | 32536 |
|---|---|
| Brand | Draper Tools |
Extended Product Information
FAQs
What is the drive size of this socket?
The drive size is 1/4".
What size fasteners does this socket fit?
This socket is designed for 8mm fasteners.
What material is the socket made from?
It is made from chrome vanadium steel.
How do I clean the socket?
Clean the socket after each use to remove debris. Use a wire brush for rust removal if necessary.
Where should I store the socket?
Store the socket in a dry place to prevent rust and corrosion.
Can I use this socket with an impact wrench?
This socket is designed for hand use, not necessarily for impact wrenches. Check socket specifications for impact tool compatibility.
What does the knurled ring do?
The knurled ring provides extra grip, especially when your hands are oily or wet.
Troubleshooting
Socket won't fit onto the fastener.
Ensure you're using the correct 8mm socket size. Double-check the fastener's size.
Socket slips or rounds off the fastener.
Make sure the socket is fully seated on the fastener. Avoid applying excessive force. Consider using a different socket type if the fastener is severely damaged.
Rust or corrosion on the socket.
Clean the socket with a wire brush or a rust-removing solution. Apply a light coating of oil after cleaning to prevent future corrosion.
Pros and Cons
Pros
- Durable chrome vanadium steel construction.
- Secure 6-point design for better grip.
- Knurled ring for enhanced grip.
- Polished finish for corrosion protection.
- Compatible with standard 1/4" drive tools.
Cons
- Limited to 8mm fasteners.
- May require specific adapters for certain tools.
- Requires proper care to prevent rust or damage.
Setup, Compatibility & Care
Setup:
- Attach the socket to a 1/4" drive ratchet or extension.
- Ensure the socket fits securely onto the fastener.
- Apply force to tighten or loosen the fastener.
Compatibility:
- Compatible with any 1/4" drive tools (ratchets, extensions, etc.).
- Suitable for use with 8mm fasteners.
Care:
- Clean the socket after each use to remove debris and prevent rust.
- Store in a dry place to avoid corrosion.
- Avoid using excessive force, which could damage the socket or the fastener.