KLEVV URBANE V RGB PC RAM - 32 GB - 6400 MHz
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The KLEVV URBANE V RGB DDR5 memory is designed for performance enthusiasts, gamers, and content creators looking to maximize their desktop system's responsiveness and multitasking capabilities. With its high 6400 MHz speed and low CL30 latency, it provides a noticeable boost in system performance, though users should ensure their motherboard platform supports the high-speed profiles required to reach these advertised frequencies.
All features
| Series | URBANE V RGB |
|---|---|
| Model Part Number | 528312 |
| Brand | KLEVV |
Extended Product Information
FAQs
Is this memory compatible with both Intel and AMD systems?
Yes, it supports Intel XMP 3.0 and AMD EXPO profiles to ensure compatibility with most modern DDR5 platforms.
Do I need to do anything to make it run at 6400 MHz?
Yes, you must enable the XMP or EXPO profile in your motherboard's BIOS settings; otherwise, it will run at standard base speeds.
What does on-die ECC mean for my system?
On-die ECC provides automatic correction of minor data errors within the memory chip itself, which improves overall system reliability.
Will this fit under my CPU cooler?
The URBANE V RGB features a heatsink design, but you should verify your CPU cooler's clearance specifications to ensure it does not obstruct the RAM slots.
Can I mix this with my existing RAM sticks?
Mixing memory kits is not recommended as it can lead to instability and may force the system to run at the speed of the slowest module.
Is the RGB lighting customizable?
Yes, the RGB lighting is fully customizable via most major motherboard lighting software suites.
Troubleshooting
System fails to boot or POST at 6400 MHz
Clear CMOS settings and ensure your motherboard BIOS is updated to the latest version, then re-enable XMP or EXPO.
RGB lighting is not synchronized with other components
Download the official lighting control software for your motherboard or ensure the memory is correctly detected by your third-party RGB ecosystem software.
Memory running at default JEDEC speed instead of 6400 MHz
Check the BIOS to confirm the XMP or EXPO profile is manually selected and saved; default speeds are often lower to ensure initial compatibility.
Pros and Cons
Pros
- Excellent 6400 MHz speed for demanding applications
- Tight CL30 latency ensures responsive performance
- On-die ECC provides enhanced reliability
- Compatible with both Intel and AMD performance profiles
- Effective thermal management via integrated heatsink
Cons
- Requires BIOS configuration to hit maximum speed
- Higher profile height may conflict with some large air coolers
- System stability depends on motherboard memory QVL
Setup, Compatibility & Care
To achieve the full 6400 MHz speed, you must enter your motherboard's BIOS/UEFI settings and enable the XMP (Intel) or EXPO (AMD) profile after installation. Ensure the modules are seated firmly into the DIMM slots—most motherboards require them in slots two and four for dual-channel optimization. Handle the RAM by the edges to avoid electrostatic discharge on the gold contacts. While the heatsink is effective, avoid using abrasive cleaning agents; a simple blast of compressed air is sufficient to remove dust from the heatsink fins and RGB light diffusers.