Numatic Henry Cylinder Vacuum Cleaner - Red
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone seeking to understand and effectively use the Numatic Henry HVR200-A2 vacuum cleaner. The Henry vacuum offers powerful cleaning with its energy-efficient design, large capacity, and HEPA filtration, making it ideal for homes. A key caveat is its slightly larger size compared to some compact models, which might require more storage space.
All features
| Colour | Red |
|---|---|
| Series | Henry |
| Model Part Number | HVR.200-A2.RED.BLACK |
| Brand | Numatic |
Extended Product Information
FAQs
How do I replace the dust bag?
Open the vacuum head, remove the full dust bag, and replace it with a new HepaFlo dust bag. Ensure the bag is properly seated before closing the head.
How often should I replace the filters?
The HEPA filter should be replaced periodically, depending on usage. Check the filter regularly for wear and tear, and replace it when necessary. Refer to the user manual for specific recommendations.
Can I use this vacuum on wet surfaces?
No, the Numatic Henry HVR200-A2 is designed for dry cleaning only. Do not use it on wet surfaces or to pick up liquids.
What attachments come with the vacuum?
The vacuum typically includes a crevice tool, dusting brush, and upholstery nozzle.
How long is the power cord?
The power cord is 10 meters long, providing a large operating radius.
What is the dust capacity of the vacuum?
The dust capacity is 9 liters.
Where can I find replacement dust bags?
Replacement HepaFlo dust bags are widely available at most major retailers.
What is the noise level of the vacuum?
The noise level is 68 dB.
Troubleshooting
Vacuum is not turning on.
Check the power outlet and ensure the plug is securely connected. Check the fuse in the plug.
Poor suction performance.
Check the dust bag and replace it if full. Inspect the hose and attachments for blockages. Clean or replace the filters.
Unusual noises during operation.
Turn off the vacuum and check for any obstructions in the hose or brush head. Ensure all parts are properly assembled. If the noise persists, consult the user manual or contact customer support.
Cable not retracting fully.
Gently pull the cable out a little further, then try retracting again. Ensure the cable is not twisted or caught. If the issue persists, contact customer support.
Pros and Cons
Pros
- Powerful suction for effective cleaning.
- Large dust capacity minimizes the need for frequent bag changes.
- Energy-efficient design helps save on electricity bills.
- HEPA filtration captures allergens and fine dust.
- Long cable and operating radius for extended reach.
- Durable and reliable construction for long-term use.
Cons
- May require more storage space due to its size.
- The 68dB noise level might be a bit loud for some users.
- Dust bag replacement is required.
- While the cable rewind is "trouble free", it may require a little more force to retract the entire 10m cable.
- The HEPA filter will need periodic replacement.
Setup, Compatibility & Care
- Assembly: Unpack the vacuum and attach the hose, wand, and cleaning head. Ensure all parts are securely connected.
- Power Connection: Plug the power cord into an electrical outlet.
- Operation: Turn on the vacuum using the power switch. Adjust the power setting as needed.
- Emptying the Dust Bag: When the bag is full, replace it with a new HepaFlo dust bag. (See the included instructions).
- Filter Maintenance: Clean or replace the HEPA filter as needed.
- Compatibility: Suitable for cleaning carpets, hard floors, and various surfaces using the appropriate attachments.
- Care Instructions: Regularly empty the dust bag and replace it when full. Clean the exterior with a damp cloth. Check and clean or replace filters as needed. Store the vacuum in a dry place.