Fiddes - Mellow Furniture And Woodwork Wax - English Oak
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for woodworkers, furniture restorers, and DIY enthusiasts seeking a high-quality, traditional wood finish. The Fiddes Mellow Wax in English Oak offers a beautiful, natural sheen and protection for sealed or previously polished wood, providing a rich, aged look. A caveat to consider is that it is best suited for sealed or already finished wood surfaces, not raw timber.
All features
| Model Part Number | MWEnglishOak |
|---|---|
| Brand | Fiddes |
Extended Product Information
FAQs
Can I use Fiddes Mellow Wax on raw wood?
No, Fiddes Mellow Wax is specifically formulated for sealed or previously polished wood surfaces. It will not provide adequate protection or finish on raw timber.
How many coats of wax should I apply?
Typically, one or two thin coats are sufficient. The number of coats depends on the desired depth of color and level of protection. Allow each coat to dry to a dull sheen before buffing.
What is the difference between the shades?
The shades (e.g., English Oak, Georgian Mahogany) are different colorants within the beeswax formula. English Oak provides a warm, classic oak tone, while other shades offer variations to match different wood types and aesthetics.
How long does the finish last?
The longevity of the finish depends on usage and environmental conditions. For most interior applications, a reapplication may be needed annually or when the sheen diminishes.
Can I apply this over an existing varnish or lacquer?
Yes, provided the existing varnish or lacquer is sound, clean, and dry, the Mellow Wax can be applied over it to enhance its appearance and provide a protective layer.
Is this wax suitable for exterior use?
No, Fiddes Mellow Wax is intended for interior wood finishes only. It does not offer the durability or weather resistance required for exterior applications.
How do I remove the wax if needed?
Wax can typically be removed using a solvent such as mineral spirits or white spirit applied to a clean cloth. Wipe down the surface and allow it to dry before applying a new finish.
Troubleshooting
Wax appears streaky or uneven
Ensure you are applying a thin, even coat. Buff thoroughly with a clean cloth to blend any imperfections. If the issue persists, the surface may not have been adequately prepared or may require another thin coat followed by buffing.
Surface feels tacky after application
This usually indicates the wax was applied too thickly or did not dry completely. Continue buffing with a clean, soft cloth. If still tacky, apply a small amount of solvent (like white spirit) to a cloth and lightly wipe the surface, then buff immediately. Ensure good ventilation.
Lack of sheen after buffing
Buff more vigorously with a clean, dry, soft cloth. Ensure the wax has fully dried before buffing. For a higher sheen, a second thin coat followed by thorough buffing may be necessary.
Existing finish appears dull
The Mellow Wax is designed to enhance existing finishes. Ensure the surface is clean before application. The wax itself provides a gentle sheen; if a higher gloss is desired, consider a different product or a different finishing wax.
Pros and Cons
Pros
- Offers a beautiful, natural sheen.
- Enhances the existing wood color with a rich English Oak tone.
- Provides a protective layer for sealed or polished wood.
- Easy to apply for a smooth finish.
- Suitable for a variety of interior wood projects.
Cons
- Not suitable for raw, unfinished wood.
- Requires the wood surface to be sealed or previously polished.
- May require multiple applications for deeper color or protection.
- Dries to a natural sheen, not a high-gloss finish unless buffed extensively.
Setup, Compatibility & Care Instructions
Compatibility:
Fiddes Mellow Wax is designed for use on sealed or previously polished wood surfaces. It is not intended for raw, unfinished timber.
Application:
- Preparation: Ensure the surface is clean, dry, and free from dust, grease, or old, flaking finishes. For best results, the wood should already have a seal or existing polish.
- Application: Apply a thin, even coat of the wax using a clean, soft cloth, a waxing pad, or very fine steel wool (grade 0000) in the direction of the wood grain.
- Drying: Allow the wax to dry to a dull sheen, typically 10-20 minutes depending on ambient conditions.
- Buffing: Buff the surface vigorously with a clean, soft cloth or a buffing machine to achieve a protective sheen. For a richer color or enhanced protection, a second application can be made.
Care:
To maintain the finish, periodically dust the surface. For cleaning, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners or excessive moisture. Reapply wax as needed, typically once or twice a year for well-used surfaces, or when the sheen begins to fade.