Weidmuller Wire End Sleeve - 9037470000 [500 Pieces]
Not Available![Weidmuller Wire End Sleeve - 9037470000 [500 Pieces]](https://shopping-cdn.redbrain-websites-websites.systems.io/v/e071100b88c19a32fd8d99aa946de43c4e38329faadb6739145c9aea033c03ae_500x500.jpeg)
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for electricians and technicians working with electrical wiring who need a reliable and insulated connection for 1.5mm² (16 AWG) wires. The Weidmuller H1.5/16D ZH SW offers a secure, insulated, and tinned copper connection, ensuring electrical safety and long-term performance. A potential consideration is the specific stripping length required, which needs to be precise for optimal crimping.
All features
| Model Part Number | 9037470000 |
|---|---|
| Brand | Weidmüller |
Extended Product Information
FAQs
What is the main advantage of using a twin ferrule?
A twin ferrule allows two individual wires of the same gauge to be terminated into a single connection point, which helps with wire management, organization, and creating a consolidated connection.
What wire size is this ferrule designed for?
This ferrule is specifically designed for wires with a nominal cross-sectional area of 1.5 mm², which is equivalent to AWG 16.
What material is the ferrule made of?
The ferrule is made of tinned copper, providing good conductivity and corrosion resistance.
What type of insulation does it have?
It features insulation made of polypropylene (PP) in black, which offers electrical protection and mechanical strength.
What is the required stripping length for the wires?
The recommended stripping length for the wires is 1.1 cm (11 mm).
How many ferrules are in a pack?
This product comes in a pack of 500 pieces.
What tool do I need to install this ferrule?
You will need a dedicated ferrule crimping tool that is compatible with insulated ferrules of 1.5 mm² (AWG 16) size. Ensure the tool is set correctly for optimal crimping.
Troubleshooting
Ferrule does not crimp properly
Ensure you are using the correct ferrule size (1.5mm²/AWG 16) and a compatible crimping tool. Verify the tool is properly adjusted for the ferrule size. Check that the wires are fully inserted into the ferrule before crimping.
Wires pull out of the ferrule
The crimp may be too loose. Re-crimp with adequate pressure using the correct tool. Ensure the wires were stripped to the correct length (1.1 cm) and fully inserted before crimping.
Electrical connection is intermittent
Check the crimp quality; a poor crimp leads to high resistance. Ensure the tinned surface of the ferrule is clean and free of oxidation. Inspect the connection point within the terminal block or device for any issues.
Insulation is damaged during crimping
The crimping tool may be set too aggressively or the ferrule is not fully seated. Ensure the jaws of the crimping tool are aligned correctly and not over-squeezing the ferrule. Try a slightly different crimping position.
Pros and Cons
Pros
- Provides a secure and insulated termination for two wires simultaneously.
- Tinned copper ensures excellent electrical conductivity and corrosion resistance.
- Durable polypropylene insulation offers protection and safety.
- Optimized for 1.5mm² (AWG 16) wire, ensuring proper fit and performance.
- Compact twin ferrule design aids in wire management.
Cons
- Requires precise stripping length (1.1 cm) for correct crimping.
- Not suitable for wires outside the specified 1.5mm² (AWG 16) range.
- Requires a specific ferrule crimping tool for proper installation.
Setup, Compatibility & Care
Setup:
- Prepare the wires: Strip the insulation from the ends of two wires to the specified stripping length of 1.1 cm (11mm).
- Insert wires: Insert both stripped wire ends into the twin ferrule until they are fully seated.
- Crimp: Use a suitable, insulated ferrule crimping tool to crimp the ferrule onto the wires. Ensure the tool is set for 1.5mm² or AWG 16 ferrules. A proper crimp will create a solid, compact connection.
Compatibility:
- Wire Size: Primarily designed for 1.5 mm² (AWG 16) stranded conductors. While it may fit slightly different sizes, optimal performance is guaranteed only within the specified range.
- Tools: Requires a dedicated ferrule crimping tool (e.g., a hexagonal or square crimp tool) designed for insulated ferrules of this size.
Care:
- Storage: Store in a dry environment to prevent corrosion of the tinned copper.
- Cleaning: If necessary, clean with a dry or slightly damp cloth. Avoid harsh chemicals.
- Inspection: Periodically inspect crimped connections for any signs of damage, corrosion, or loose connections, especially in harsh environments.