Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for industrial automation professionals and engineers needing reliable sensor/actuator connections. The Phoenix Contact 1641772 M12 connector offers a quick and robust solution with its insulation displacement connection technology. A potential caveat is its specific cable diameter range, requiring verification for compatibility.
| Model Part Number | 1641772 |
|---|---|
| Brand | Phoenix Contact |
A-coding is the standard for M12 connectors used in industrial automation for signal and sensor applications. It defines the pin configuration and keying to prevent incorrect mating with other M12 code types (like B, D, or X).
IDC is a method of terminating wires without stripping the insulation. The connector has sharp contacts that pierce the wire's insulation as it's inserted, creating a direct electrical connection.
This connector is designed to accommodate external cable diameters ranging from 4 mm to 8 mm.
IP65 means the connector is protected against dust ingress and low-pressure water jets. IP67 means it is protected against dust and immersion in water up to 1 meter for 30 minutes.
Yes, it is rated for 250V and 4A, making it suitable for many standard industrial sensor and actuator power supply applications, but always verify the specific requirements of your application.
Proper insertion of the conductor into the IDC slot and the secure closing of the connector housing are crucial. Ensure the conductor is straight and fully seated before actuation.
The housing is made of zinc die-cast with nickel plating, and the contacts are copper plated with gold.
Verify that the male and female M12 connectors are properly aligned and fully seated. Check for any obstructions or debris on the contact surfaces. Ensure the cable is correctly terminated within the IDC connector.
Inspect the cable termination within the IDC for loose strands or improper seating. Check the cable itself for damage. Ensure the cable diameter is within the specified range (4-8mm) for optimal IDC performance.
Ensure the cable gland is tightened correctly around the cable. Verify that the sealing surfaces of both the male and female connectors are clean and free from debris before mating. Check the cable for any damage that might compromise sealing.
Ensure the conductor is stripped to the correct length and is not frayed. Confirm you are using the correct wire gauge for the connector's intended application (typically 0.75 mm² based on the model number suffix).
Setup:
Compatibility:
Care:
