PlastiKote Anti-Slip Spray Paint 400ml - 071021
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to increase safety on slippery surfaces like stairs and bathroom floors using PlastiKote Anti-Slip Spray Paint. The paint provides a transparent matt finish with anti-slip particles for enhanced grip, even in wet conditions. Keep in mind that while it offers good adhesion, surface preparation is key for optimal results.
All features
| Model Part Number | 071021 |
|---|---|
| Brand | PlastiKote |
Extended Product Information
FAQs
How much surface area does one can cover?
One can typically covers 1-1.6m².
How long does it take for the paint to dry?
It is touch dry in 10 minutes.
What surfaces can I use this paint on?
It can be used on concrete, asphalt, tiles, wood, metal, linoleum, and most plastics.
Is this paint suitable for outdoor use?
Yes, it is suitable for both indoor and outdoor applications.
Is the paint resistant to chlorine and saltwater?
Yes, the paint is resistant to both chlorine and saltwater.
How should I prepare the surface before painting?
Clean the surface thoroughly to remove any dirt, grease, or loose paint. Ensure the surface is dry.
Can I use this on a heavily trafficked area?
While it improves grip, the lifespan in heavily trafficked areas may be shorter. Regular inspection and reapplication may be needed.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free of any contaminants. Lightly sand glossy surfaces to improve adhesion.
The finish is not even.
Apply thin, even coats, and avoid spraying too heavily in one area. Ensure you are holding the can the correct distance from the surface and shake the can adequately before application.
The anti-slip effect is not sufficient.
Apply additional coats, allowing the paint to dry between each coat. Ensure you are using the product on a suitable surface.
Pros and Cons
Pros
- Enhances safety by increasing grip on slippery surfaces.
- Fast-drying formula minimizes waiting time.
- Suitable for use on a wide range of materials.
- Resistant to chlorine and saltwater, extending its lifespan in challenging environments.
- Easy application due to the upside-down valve.
- Provides a transparent finish, preserving the original look of the surface.
Cons
- Requires proper surface preparation for optimal adhesion.
- Coverage is limited to 1-1.6m² per can.
- May require multiple coats for desired anti-slip effect.
- The finish is a matt finish, so the level of grip could be less than other products.
Setup, Compatibility & Care
Setup
- Preparation: Clean the surface thoroughly. Remove any loose paint, dirt, grease, or rust. Ensure the surface is completely dry.
- Application: Shake the can vigorously for at least one minute after the mixing ball begins to rattle.
- Spraying: Hold the can approximately 20-30 cm (8-12 inches) from the surface. Apply in even strokes.
- Coats: Apply multiple thin coats, allowing a few minutes between each coat.
- Drying: Allow the paint to dry completely. Touch dry in 10 minutes.
Compatibility
PlastiKote Anti-Slip Spray Paint is compatible with: concrete, asphalt, tiles, wood, metal, linoleum, and most plastics.
Care
- Cleaning: Clean the painted surface with mild soap and water. Avoid abrasive cleaners.
- Maintenance: Regularly inspect the surface for wear and reapply as needed to maintain anti-slip properties.