A grey, cement-based, polymer modified joint filling compound for tile joints from 3mm wide up to 10mm wide around all types of ceramic floor tiles. Can be used in interior and exterior applications. Conforms to EN 13888 Type CG Class 1UsesFLOOR TILE GROUT is formulated to provide a flowable, readily compactable grouting slurry, which can be easily applied across all types of ceramic tiled surfaces. FLOOR TILE GROUT will dry to a hard, durable, water resistant finish, suitable for interior and exterior applications, including swimming pools.PreparationCheck that all the tiles are securely fixed and that the tile adhesive has thoroughly dried before applying any load or pressure to the tiled surface. Allow a minimum of 12-24 hours when using standard setting adhesives and ready mixed adhesives, or 2-3 hours when using fast setting adhesives. Ensure all joints are a maximum of 3mm wide and they are raked clear of any excess adhesive residues to allow an even and consistent depth of grout to be applied in all areas. It is recommended that that current best practice e.g. the current TTA or COP guidelines are always followed.