Humbrol Paint - 14ml - 19 Bright Red Gloss
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for hobbyists and model makers using Humbrol 19 Bright Red Gloss Enamel Paint. This fast-drying, solvent-based paint offers a vibrant, glossy finish suitable for various surfaces. However, note that drying times can vary depending on environmental conditions.
All features
| Model Part Number | 22.AA0206 |
|---|---|
| Brand | Humbrol |
Extended Product Information
FAQs
What is the drying time for Humbrol 19 Bright Red Gloss?
The paint is touch-dry in 1-2 hours and fully dry in up to 24 hours. Drying times vary depending on temperature and humidity.
Can I use this paint on metal?
Yes, Humbrol 19 Bright Red Gloss can be used on metal surfaces. Ensure the surface is clean and properly prepared.
How should I clean my brushes after use?
Clean brushes immediately after use with Humbrol Enamel Thinners.
What thinner should I use with this paint?
Use Humbrol Enamel Thinners. This is essential for airbrushing and cleaning.
How much area does a 14ml tin cover?
A 14ml tin covers approximately 0.3m², depending on the thickness of application.
Can this paint be used on fabric?
While the paint can adhere to some fabrics, it is primarily designed for hard surfaces like plastic, wood, and metal. It is best to test on a small area of the fabric first.
Is it safe for children to use?
This product is recommended for children, but adult supervision is advised. Ensure the area is well-ventilated during use.
Troubleshooting
Paint is not drying properly.
Ensure the room temperature is within the recommended range. Check for excessive humidity. Allow additional drying time, up to 24 hours.
Paint appears too thick or clumpy.
Stir the paint thoroughly. If airbrushing, thin the paint with Humbrol Enamel Thinners to the correct consistency.
Brush strokes are visible after painting.
Apply thinner coats and ensure the brush is clean. For a smoother finish, consider using an airbrush.
Paint is not adhering to the surface.
Ensure the surface is properly prepared, clean, and lightly sanded. Consider using a primer if necessary.
Pros and Cons
Pros
- Fast drying time, allowing for quick project completion.
- Provides a durable and glossy finish.
- Can be used on a variety of different materials.
- Easy to apply with a brush or airbrush.
- The vibrant red color is great for models.
Cons
- Drying times can be affected by humidity and temperature.
- Requires the use of Humbrol Enamel Thinners for airbrushing and cleaning.
- Strong solvent smell during application.
- Permanent once dry, so mistakes are harder to correct.
Setup, Compatibility & Care
- Preparation: Ensure the surface is clean, dry, and free of grease or dust. Lightly sand plastic surfaces for better adhesion.
- Application: Stir the paint thoroughly before use. Apply thin, even coats using a brush or airbrush. Two thin coats are preferable to one thick coat.
- Thinning (for airbrush): Thin with Humbrol Enamel Thinners, typically using a 2:1 paint to thinner ratio.
- Cleaning: Clean brushes and airbrushes immediately after use with Humbrol Enamel Thinners.
- Compatibility: This paint is compatible with plastic, wood, glass, ceramics, metal, cardboard, sealed plaster, and sealed hardboard. Always test on a small area first.
- Storage: Store in a cool, dry place, away from direct sunlight and heat. Keep the tin tightly sealed when not in use.
- Care: Avoid prolonged exposure to direct sunlight. Use in a well-ventilated area.