Alloy Backsplash - 600 x 800 x 4mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This ALLOY Geometry Kitchen Hob Splashback is designed for homeowners, designers, and DIY enthusiasts looking to add a modern and stylish protective layer to their kitchen walls. Its key benefit is combining a striking geometric design with practical durability, offering a heat and moisture-resistant surface that is easy to clean. A potential caveat is its specific size (600 x 800 x 4mm), which may require careful planning for installation in certain kitchen layouts. Key features include premium aluminium composite material (ACP) construction, a modern geometric pattern, and resistance to heat, moisture, and scratches.
All features
| Model Part Number | Alloy Geometry Kitchen Hob Splashback 600 x 800 x 4mm |
|---|---|
| Brand | ALLOY |
Extended Product Information
FAQs
What material is the splashback made from?
The splashback is crafted from premium Aluminium Composite Material (ACP).
What are the dimensions of this splashback?
The dimensions are 600mm in width, 800mm in height, and 4mm in thickness.
Is this splashback suitable for use directly behind a hob?
Yes, it is heat-resistant and designed for use above hobs and cooking areas, providing protection against heat and splashes.
How do I clean the splashback?
You can clean it easily with a soft, damp cloth. For tougher stains, use a mild, non-abrasive detergent diluted in water.
Can I cut the splashback to a different size?
Yes, the splashback can be cut to size using appropriate tools for composite materials. Ensure clean cuts are made for a professional finish.
What kind of adhesive should I use for installation?
Use a high-quality adhesive specifically recommended for kitchen splashbacks and Aluminium Composite Material (ACP). Consult with a hardware professional for the best product for your wall type.
Is the surface scratch-resistant?
Yes, the splashback features a scratch-resistant surface designed to withstand daily wear and tear.
Troubleshooting
Splashback is not adhering well to the wall.
Ensure the wall surface is thoroughly cleaned, dried, and free of any grease or dust. Use a high-quality adhesive specifically designed for ACP and kitchen splashbacks, and ensure sufficient adhesive is applied evenly.
Surface appears scratched.
Avoid using abrasive cleaning materials. For minor scratches, try a specialized plastic polish or a very fine grit abrasive pad, testing on an inconspicuous area first. For deeper scratches, replacement may be necessary.
Cutting the splashback resulted in rough edges.
Use a sharp fine-tooth blade (e.g., a jigsaw or circular saw) designed for cutting composite materials. Ensure the splashback is securely supported during cutting to prevent chipping. Sand edges gently with fine-grit sandpaper if necessary.
Heat damage is visible.
While heat-resistant, prolonged direct exposure to extreme heat sources can cause damage. Ensure adequate ventilation and maintain recommended distances from the heat source as per hob manufacturer guidelines. If damage occurs, replacement is recommended.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a modern geometric design.
- Provides excellent protection against heat, moisture, and scratches.
- Easy to maintain with a simple wipe-clean surface.
- Durable ACP construction ensures longevity.
- Suitable for various kitchen applications, including behind hobs and as a backsplash.
Cons
- Fixed size (600 x 800 x 4mm) may not fit all spaces without modification.
- Requires careful installation to ensure a seamless and secure fit.
- While resistant, extreme heat or impact could potentially damage the material.
- Geometric pattern might not suit all interior design styles.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and free from dust or debris before installation.
- Measure and cut the splashback if necessary, using appropriate tools for ACP material.
- Apply a suitable adhesive recommended for splashbacks and ACP to the wall or the back of the splashback.
- Carefully position and press the splashback firmly onto the wall, ensuring it is level and securely attached.
- Seal the edges if required, using a kitchen-grade sealant.
Compatibility:
This splashback is designed for use above standard kitchen hobs, countertops, and preparation areas. It is compatible with most kitchen wall surfaces, provided they are properly prepared. While it can be cut to size, ensure clean cuts are made to maintain the integrity of the material.
Care:
- Clean spills and splatters promptly using a soft, damp cloth.
- For tougher marks, use a mild, non-abrasive detergent diluted in water.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals that could scratch or damage the surface.
- Do not use excessive water around the edges if not properly sealed.