E-Tech Engineering Filler - 250g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for automotive enthusiasts and DIY repairers looking to fix minor bodywork imperfections. The E-Tech Engineering Filler offers a key benefit of easily shaping and achieving a smooth, bubble-free finish thanks to its Nano-Polymer technology. A caveat is that it's designed for small imperfections up to 3mm in depth. This filler is ideal for seamlessly repairing small dents, scuffs, and scratches on vehicle bodywork.
All features
| Model Part Number | ER00107 |
|---|---|
| Brand | E-Tech Engineering |
Extended Product Information
FAQs
What types of damage can this filler repair?
This filler is suitable for small dents, slight scuffs, and scratches on vehicle bodywork, with a filling depth of up to 3mm.
How deep can I apply the filler?
The filler can be applied to fill imperfections up to a depth of 3mm.
Does the filler come with an applicator?
This product information does not specify if an applicator is included. Typically, a separate body filler spreader is recommended.
Can I paint over the filler?
Yes, once the filler is fully cured and sanded smooth, it can be primed and painted like the rest of the bodywork.
How long does the filler take to cure?
Cure times can vary based on environmental conditions. Refer to the product packaging for specific curing instructions.
Is this filler suitable for large rust holes?
No, this filler is designed for minor surface imperfections up to 3mm deep and is not intended for repairing large rust holes or structural damage.
Troubleshooting
Filler is difficult to shape
Ensure the product has not expired and has been stored correctly. Work in a temperature-appropriate environment as per product guidelines.
Filler cracked after curing
The affected area may have been too deep for a single application or the surface was not properly prepared. Ensure application does not exceed 3mm depth and the surface is clean and sound.
Poor adhesion to the surface
The surface was likely not properly cleaned, degreased, or sanded. Re-clean and abrade the surface before reapplying.
Air bubbles present in the cured filler
Apply the filler in thin layers, pressing it firmly into the defect to avoid trapping air. Ensure no moisture is present on the surface during application.
Pros and Cons
Pros
- Easy to shape for precise application.
- Produces a smooth, bubble-free finish.
- Ideal for minor cosmetic repairs.
- Direct application reduces mess and complexity.
- Advanced Nano-Polymer technology for superior results.
Cons
- Limited to repairs up to 3mm depth.
- Not suitable for deep dents or structural damage.
- Requires proper surface preparation for optimal adhesion.
- May require sanding and priming after application.
Setup, Compatibility & Care
Setup: Ensure the affected area is clean, dry, and free from rust or loose paint. Apply the filler directly to the cleaned surface, shaping it to match the contour of the surrounding panel. Allow the filler to cure fully according to manufacturer instructions before sanding.
Compatibility: This filler is designed for use on automotive bodywork. It is compatible with most standard automotive primers and paints once fully cured and sanded.
Care: Store the filler in a cool, dry place, tightly sealed, to maintain its consistency and prevent drying out. Clean application tools immediately after use.