Fiddes - Mellow Furniture And Woodwork Wax - Light - 400Ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Fiddes Mellow Wax Polish in Light is ideal for homeowners and craftspeople looking to restore and protect fine wooden surfaces like furniture, doors, floors, cabinets, and paneling. Its key benefit is providing a high-quality, traditional beeswax finish that enhances the natural beauty of wood. A potential caveat is that it is designed for sealed or previously polished wood, not raw or unfinished surfaces.
All features
| Model Part Number | RH45 |
|---|---|
| Brand | Fiddes |
Extended Product Information
FAQs
Can I use Fiddes Mellow Wax on my newly sanded, unfinished oak table?
No, Fiddes Mellow Wax is formulated for sealed or previously polished wood. For unfinished wood, you would typically apply a primer or sealant first, followed by the wax, or use a wax specifically designed for raw wood.
How many coats of wax should I apply?
Generally, one or two thin, well-buffed coats are sufficient for protection and a pleasing sheen. If you desire a deeper build or more protection, additional thin coats can be applied after the previous one has dried and been buffed.
What is the drying time for the wax?
The wax typically takes 10-20 minutes to dry to a dull finish, ready for buffing. This can vary depending on the thickness of application, temperature, and humidity of the room.
Can this wax be used on wooden floors?
Yes, Fiddes Mellow Wax is recommended for use on floors, provided they are sealed or previously polished. It offers good protection and a natural sheen suitable for foot traffic.
How often should I reapply the wax?
Reapplication frequency depends on the level of use and wear. For most furniture, reapplying every 6-12 months is usually sufficient. For high-traffic areas like floors, more frequent touch-ups might be necessary.
Will this wax darken the wood?
The 'Light' shade is designed to enhance the natural colour of wood without significant darkening. However, all waxes can add a slight depth or richness to the wood tone. Always test on an inconspicuous area if exact colour matching is critical.
Is ventilation required during application?
Yes, it is advisable to use the product in a well-ventilated area, especially during application and drying, to ensure comfort and proper curing of the finish.
Troubleshooting
Wax is difficult to spread evenly.
Ensure the surface is warm or apply the wax in a warmer room. If the wax is too stiff, you can slightly warm the tin (e.g., by placing it in warm water) before application, but do not overheat. Apply in thinner coats.
Surface appears streaky or uneven after buffing.
This may be due to applying the wax too thickly or not buffing sufficiently. Allow the wax to dry thoroughly, then buff again with a clean, soft cloth. If streaks persist, try applying a very thin additional coat and buffing carefully.
Wood does not appear to be absorbing the wax.
The surface may be too highly polished or sealed with a non-porous finish. Ensure the surface is properly prepared and compatible with wax finishes. Lightly abrading with very fine steel wool (0000 grade) or a fine sanding sponge might help, but test in an inconspicuous area first.
White residue after application.
This can occur if the wax is applied too heavily or if there is a reaction with the underlying finish. Buff vigorously with a clean cloth. If residue remains, try gently cleaning the area with a cloth slightly dampened with white spirit (test first) and then reapply a thin coat of wax.
Pros and Cons
Pros
- Provides a durable, protective finish for wood.
- Enhances the natural grain and beauty of wood.
- Easy to apply to sealed or pre-finished surfaces.
- Available in multiple shades to match existing wood tones.
- Economical due to good coverage rates.
Cons
- Not suitable for raw or unfinished wood.
- Requires adequate ventilation during application.
- May require buffing for optimal shine.
- Drying time can vary depending on application thickness and ambient conditions.
Setup, Compatibility & Care
Compatibility:
- This wax polish is specifically formulated for use on sealed or previously polished wood surfaces.
- It is ideal for fine furniture, doors, floors, cabinet work, and panelling.
- It is not recommended for use on raw, unfinished, or unsealed timber.
Setup & Application:
- Ensure the wood surface is clean, dry, and free from dust, grease, and old, flaky finishes.
- If the surface is previously finished, test the wax on an inconspicuous area first.
- Apply a thin, even coat of Fiddes Mellow Wax Polish using a soft, lint-free cloth or applicator pad.
- Work the wax into the wood surface, following the grain.
- Allow the wax to dry for approximately 10-20 minutes, or until a dulling effect appears.
- Buff the surface vigorously with a clean, soft cloth or buffing machine to achieve the desired sheen.
- For a deeper build or enhanced protection, apply additional thin coats, allowing each to dry and buffing as needed.
Care:
- Regular dusting with a soft cloth will maintain the finish.
- For cleaning, use a slightly damp cloth and wipe dry immediately. Avoid abrasive cleaners or excessive moisture.
- Periodically reapply a thin coat of wax as needed to maintain protection and appearance, typically every 6-12 months depending on wear.