Insectocutor Fly Killer Replacement Tube - 12 Inch 15W T5
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of insectocutor devices seeking an effective replacement for their existing bug zapper tubes. The 12-inch, 15W T5 Insectocutor Replacement Tube from Blacklight provides a reliable pest control solution, efficiently attracting and killing flying insects like flies and bugs. A key benefit is its direct compatibility, ensuring a straightforward replacement process. The primary consideration is ensuring your device uses the T5, 12-inch, 15W specification.
All features
| Model Part Number | T5 |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What is the lifespan of this replacement tube?
Typically, UV insect killer tubes lose effectiveness after approximately 6 to 12 months of continuous use, depending on the operating environment. It's recommended to replace it annually for optimal performance.
How do I know if this T5 tube is compatible with my device?
This tube is 12 inches long and 15W, designed for T5 socket insectocutors. Check your existing tube's label or your device's manual for '12 inch', '15W', and 'T5' specifications. If these match, it should be compatible.
Can I use this tube in a different type of light fixture?
No, this tube is specifically designed for insectocutor devices. Using it in other fixtures is not recommended and may be unsafe.
Does this tube come with a protective sleeve?
This product information does not specify if a protective sleeve is included. Please refer to the product packaging or retailer listing for details.
How should I dispose of the old tube?
Older fluorescent tubes may contain small amounts of mercury. It is best to check local regulations for proper disposal of fluorescent bulbs in your area, as some areas have specific recycling programs.
What is the difference between this 15W tube and the 6W T5 tube?
The primary difference is the wattage. The 15W tube provides more UV light output and is generally intended for larger or more demanding insect control applications compared to the 6W T5 tube, which is suitable for smaller areas.
Troubleshooting
Tube does not light up
Ensure the insectocutor unit is plugged in and the power is on. Verify the tube is correctly seated in its sockets. Check if the old tube was functional, as the issue might be with the device itself.
Insects are not attracted
Make sure the tube is clean and free of dust. Confirm the tube is the correct wattage (15W) and type (T5) for your device. Check that the device is placed in an area where insects are likely to be present and away from competing light sources.
Tube flickers or seems dim
This may indicate the tube is nearing the end of its lifespan and needs replacement. Ensure a stable power connection. If flickering persists with a new tube, the issue might be with the insectocutor's ballast or wiring.
Pros and Cons
Pros
- Directly addresses insect problems like flies and bugs.
- Designed as a compatible replacement, simplifying installation.
- Standard 12-inch length and T5 type for broad compatibility.
- Offers a reliable method for pest control.
Cons
- Requires a compatible insectocutor device to function.
- Effectiveness may vary based on insect type and environmental conditions.
- This is a replacement part, not a complete unit.
Setup, Compatibility & Care
Compatibility: This tube is specifically designed as a replacement for 12-inch, 15W insectocutor devices that use the T5 tube type. Always verify the specifications of your existing insectocutor before purchasing.
Setup:
- Safety First: Ensure the insectocutor unit is unplugged from the power source.
- Access Tube Compartment: Open the device according to its specific instructions.
- Remove Old Tube: Gently twist and pull the old tube to remove it from its socket.
- Install New Tube: Align the pins of the new Blacklight T5 tube with the socket and push gently until it is seated.
- Close Unit: Securely close the device compartment.
- Power On: Plug the unit back into the power source.
Care:
- Periodically clean the exterior of the tube with a dry or slightly damp cloth to remove dust, which can reduce UV output.
- Avoid using harsh chemicals or abrasive cleaners, as they can damage the glass or coating.
- Replacement frequency depends on usage, but most UV tubes lose effectiveness after 6-12 months of continuous operation.