Loctite Extreme 1 Minute Epoxy Glue - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Loctite Extreme 1 Minute Epoxy Glue is designed for DIY enthusiasts and crafters needing quick, strong repairs on various materials like metal, wood, and plastic. Its key benefit is an ultra-fast, one-minute bonding time, allowing for speedy fixes. A potential caveat is the need for precise mixing of the two-part adhesive for optimal performance. This product offers a high-strength, durable bond, versatile material compatibility, and ease of use with its dual-syringe application.
All features
| Colour | White |
|---|---|
| Brand | Loctite |
Extended Product Information
FAQs
What is the exact curing time for full strength?
While the initial bond forms in 1 minute, the epoxy reaches its full strength after 24 hours.
Can I use this on Styrofoam or foam board?
This product is generally not recommended for use on foam or polystyrene (Styrofoam) as it can dissolve the material.
How should I store the unused epoxy?
Store the syringes in a cool, dry place. Ensure the caps are securely re-attached to prevent the epoxy from curing inside the syringe.
What is the shelf life of this product?
Unopened, the product typically has a shelf life of 2 years when stored correctly. Once mixed, it must be used within minutes.
Is the bond waterproof?
The bond provides good resistance to water once fully cured, making it suitable for many applications exposed to moisture.
Can I paint over the cured epoxy?
Yes, once fully cured, the epoxy can typically be sanded and painted over.
How do I dispense equal parts from the syringe?
Align the plungers of the two parts and push them down simultaneously, ensuring an equal amount of resin and hardener comes out.
Troubleshooting
Epoxy is not setting or bonding properly.
Ensure equal amounts of resin and hardener were dispensed and mixed thoroughly. Check that surfaces were clean and dry before application. Ensure the temperature is within the recommended range for application.
Syringes are difficult to dispense.
Ensure the caps are fully removed and the plungers are aligned correctly. If the epoxy has started to cure inside the syringe, it may be unusable.
Bond is weak or brittle.
This can occur if the mixing was insufficient or if the bond was disturbed before full curing. Allow 24 hours for full cure strength, though initial bonding occurs in 1 minute.
Difficulty in cleaning up uncured adhesive.
Use a dry cloth to wipe away as much uncured adhesive as possible. For stubborn residue, try a solvent like isopropyl alcohol on a cloth, testing in an inconspicuous area first.
Pros and Cons
Pros
- Extremely fast setting time of only one minute.
- Creates a very strong and durable bond.
- Suitable for a wide variety of common materials.
- Easy and accurate application via the dual-syringe.
- Convenient for quick household or hobby repairs.
Cons
- Requires precise mixing of two components for effectiveness.
- May not be suitable for very large or structural repairs due to size.
- Clear color might be noticeable on some materials.
- Best used for smaller, faster repairs rather than extensive projects.
Setup, Compatibility & Care
Setup:
- Ensure surfaces to be bonded are clean, dry, and free from dust or grease.
- Twist off the syringe caps.
- Align the plungers and push down to dispense equal amounts of resin and hardener onto a disposable surface.
- Mix thoroughly using the provided mixing stick until a uniform color is achieved.
- Apply the mixed adhesive to one surface.
- Press the parts together firmly and hold for the recommended time (typically 60 seconds).
Compatibility:
This epoxy is compatible with metal, wood, plastic, ceramic, and other general DIY materials. Always test on an inconspicuous area of the material if unsure.
Care:
- Store in a cool, dry place away from direct sunlight.
- Keep syringes capped when not in use to prevent curing.
- Clean up any excess uncured adhesive immediately with a damp cloth.