Big Boy Metal Filler - Silverhook - BIG22_BIGSP1
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Big Boy Metal Filler by Silverhook to repair and restore metal surfaces. The filler is designed for use on steel, aluminium, and zinc, offering excellent corrosion resistance and thermal conductivity. While it's easy to apply and sand, users should be aware of the safety precautions related to the product's hazard codes.
All features
| Model Part Number | BIG22_BIGSP1 |
|---|---|
| Brand | Silverhook |
Extended Product Information
FAQs
What surfaces can I use this filler on?
The filler is designed for use on steel, aluminium, and zinc.
How long does it take to dry?
It is ready to sand in 15 minutes.
Do I need any special tools?
You'll need a mixing tool, a surface scraper or spreader, and sandpaper.
What safety precautions should I take?
Wear gloves and eye protection. Work in a well-ventilated area. Avoid contact with skin and eyes. Follow the hazard safety codes: Xn, Xi, R10, R20, R36/38
Can I use this filler on plastic?
No, this filler is specifically designed for metal surfaces.
How should I store the filler?
Store in a cool, dry place, away from direct sunlight and heat.
What is the shelf life of the filler?
Shelf life information is not available, check the product for any specific instructions.
Troubleshooting
Filler not hardening
Ensure the correct ratio of filler and hardener is used. Make sure the mixture is thoroughly mixed.
Difficulty sanding
Allow sufficient drying time before sanding. Use appropriate sandpaper grit for the job.
Filler cracking after application
Ensure the surface is clean and free of rust. Apply in thin layers to avoid cracking.
Pros and Cons
Pros
- Easy to apply and sand
- Excellent corrosion resistance
- Suitable for use on multiple metal types
- Quick drying time
- Contains thermal conductive aluminium particles
Cons
- Requires mixing two components
- May require a respirator or adequate ventilation due to hazard codes
Setup, Compatibility & Care
- Preparation: Clean the area to be filled thoroughly.
- Mixing: Mix the filler and hardener in equal parts.
- Application: Apply the mixture to the surface.
- Drying: Allow the filler to dry for 15 minutes before sanding.
*Compatibility: Suitable for use on steel, aluminium, and zinc.
*Care: Store in a cool, dry place. Avoid contact with skin and eyes. Always follow the safety instructions on the product label. Ensure adequate ventilation during use.