Aurora Lighting Fixed GU10 Downlight - Satin in Nickel
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you understand and effectively use the Aurora Lighting Fixed GU10 Downlight. Ideal for general interior lighting, this downlight offers easy installation and fire rating compliance. Note that the light source (lamp) is not included and must be purchased separately.
All features
| Colour | Silver |
|---|---|
| Brand | Aurora Lighting |
Extended Product Information
FAQs
What type of lamps are compatible?
The downlight is compatible with GU10 lamps. It is recommended to use the Enlite LED 5W lamps (codes 80549 and 59250).
Is the lamp included?
No, the lamp is not included and must be purchased separately.
What is the fire rating?
The downlight is fire-rated for 30, 60, and 90 minutes.
What are the dimensions of the downlight?
The downlight has a diameter of 87 mm, a depth of 110 mm and requires a 75mm cut-out.
How do I replace the lamp?
Twist and unlock the retaining ring, remove the old lamp, insert the new lamp, and secure it with the twist and lock ring.
Can I use this downlight in a bathroom?
This model is not specifically rated for use in bathrooms. Aurora also offers IP65 rated versions designed for bathrooms.
Troubleshooting
The light doesn't turn on.
Check the circuit breaker and ensure the downlight is properly wired. Check the lamp is correctly installed and functioning.
The light flickers.
Check the lamp connection and replace the lamp if necessary. Ensure the voltage is correct.
Pros and Cons
Pros
- Easy to install due to the twist and lock mechanism.
- Fire-rated for safety and compliance.
- Allows for series wiring, simplifying installation with other lights.
- Compatible with a range of Enlite LED lamps.
- Sleek and versatile design.
Cons
- Lamp is not included, requiring a separate purchase.
- Limited to GU10 lamp types.
- Requires a 75mm cut-out for installation.
Setup, Compatibility & Care
- Preparation: Ensure the power is turned off at the circuit breaker before beginning the installation.
- Cut-Out: Create a 75mm diameter hole in the ceiling where you want to install the downlight.
- Wiring: Connect the wires to the loop-in/loop-out terminal block, ensuring correct polarity. Follow local electrical codes.
- Installation: Insert the downlight into the cut-out and secure it.
- Lamp Insertion: Insert the GU10 lamp into the fixture and secure it using the twist and lock ring.
Compatibility:
- Compatible with Enlite LED 5W 500lm warm white lamp (code 80549).
- Compatible with Enlite LED 5W 520lm cool white lamp (code 59250).
- Use only GU10 lamps.
Care:
- Clean the downlight with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Regularly check the lamp for proper functionality and replace if necessary.