Tetrion Stonefil Filler 900ml - White - TETTSF016
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide provides comprehensive information on using Tetrion Stonefil, a fast-setting filler ideal for repairing and restoring stone and ceramic surfaces. It's designed for both DIY enthusiasts and professionals seeking a durable and waterproof solution. While Tetrion Stonefil offers excellent adhesion and a smooth finish, it's crucial to follow the mixing instructions precisely to ensure optimal results. This guide will walk you through its key features, applications, and best practices.
All features
| Colour | White |
|---|---|
| Model Part Number | TETTSF016 |
| Brand | Tetrion |
Extended Product Information
FAQs
What is the shelf life of Tetrion Stonefil?
Shelf life can vary depending on storage conditions. Store in a cool, dry place and use within the recommended timeframe printed on the packaging for optimal results.
Can I use Tetrion Stonefil on exterior surfaces?
Yes, Tetrion Stonefil is waterproof and suitable for both interior and exterior applications.
How long does it take for Tetrion Stonefil to set?
Setting time depends on the temperature. Avoid use above 30°C or below 5°C. Check the product packaging for specific setting time information.
Can I paint over Tetrion Stonefil?
Yes, once fully set, Tetrion Stonefil can be painted. Allow the filler to cure completely before painting.
How do I clean up Tetrion Stonefil?
Clean tools immediately with cellulose thinners before the paste sets. Once set, the filler is difficult to remove.
Can I use Tetrion Stonefil on a vertical surface?
Yes, Tetrion Stonefil can be used on vertical surfaces. For heavier applications or weight-bearing repairs, consider using reinforcement like steel dowel rods.
What safety precautions should I take when using Tetrion Stonefil?
Wear appropriate safety gear such as gloves and eye protection. Work in a well-ventilated area. Avoid contact with skin and eyes. Follow the manufacturer's safety instructions.
Troubleshooting
Filler is not setting properly.
Check the temperature. Ensure it is between 5°C and 30°C. Check the mixing ratio and ensure it is correct.
Filler has air holes after setting.
Ensure the mixture is thoroughly mixed before application. Apply in thin layers if necessary to avoid air pockets.
Filler color does not match.
Tint the filler with pigments, stainers, or stone dust before adding the hardener. Test the color on a small area first.
Adhesion problems.
Ensure the surfaces are clean and free from any contaminants. Roughen smooth surfaces for better adhesion.
Pros and Cons
Pros
- Fast curing time allows for quick completion of repairs.
- Provides a durable, waterproof seal, suitable for both indoor and outdoor applications.
- Offers a super smooth finish, minimizing the need for extensive sanding.
- Can be used as both a filler and an adhesive, increasing its versatility.
- Suitable for use on a wide range of materials, including natural and ornamental stone.
- Easy to tint and customize to match existing surfaces.
Cons
- Setting time is affected by temperature, requiring careful consideration in extreme conditions.
- Requires precise mixing of filler and hardener to achieve optimal results.
- Once mixed, the paste cannot be returned to the tin, leading to potential waste.
- May require reinforcement like steel dowel rods for weight-bearing applications.
- Tools must be cleaned with cellulose thinners before the paste sets.
- Avoid use above 30°C or below 5°C.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the surface is clean, dry, and free from loose particles.
- Mixing: Mix 100 parts filler with 5 parts hardener paste to a smooth consistency. Avoid excess hardener.
- Application: Apply the mixture to the repair area or use it to bond surfaces.
- Setting: Allow the mixture to set completely. Setting time varies based on temperature.
- Finishing: Sand the surface if needed and tint it to match if desired.
Compatibility:
Tetrion Stonefil is compatible with a wide range of materials, including marble, slate, concrete, brick, stone, ceramic, china, granite, limestone, and sandstone.
Care:
- Store in a cool, dry place.
- Clean tools immediately with cellulose thinners before the paste sets.
- Avoid using above 30°C or below 5°C to ensure proper setting.