Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Ausom SR1 electric scooter is designed for experienced riders seeking high-performance urban commuting and off-road exploration. Its key benefit is the powerful dual 1000W motor system, enabling rapid acceleration, high top speeds, and exceptional hill-climbing ability. A potential caveat for some users might be its robust build, which translates to a heavier unit compared to lighter-duty scooters. This scooter boasts a combined 2000W motor, a 65 km/h top speed, a 95km range, advanced safety features, and durable construction for challenging terrains.
| Model Part Number | VHE05P |
|---|---|
| Brand | Ausom |
The maximum load capacity for the Ausom SR1 is 130 kg.
Present the provided NFC card to the designated reader on the scooter. Refer to the user manual for initial pairing and specific activation steps.
Yes, the scooter features USB-A and USB-C outputs that allow you to charge compatible devices directly from the scooter's battery.
An IP54 rating means the scooter is protected against dust ingress and water splashes from any direction. It is not designed for submersion or riding through deep water.
With dual charging inputs, the charging time can be significantly reduced. A full charge from empty typically takes several hours, but specific times may vary. Consult the user manual for estimated charging times.
The Ausom SR1 includes multiple riding modes such as Eco, Sport, and Race, allowing you to tailor performance to your preference. It also features cruise control and walk modes.
Yes, the scooter is equipped with rugged 10 x 3 inch off-road tires designed to provide grip and stability on various terrains, including unpaved paths.
Ensure the battery is charged. Check if the NFC card is properly presented to the sensor. Verify the power switch is engaged.
Check tire pressure; underinflated tires increase resistance. Ensure battery is fully charged. If the issue persists after several cycles, battery health may be degraded.
Inspect brake pads and rotors for wear or debris. Ensure hydraulic fluid levels are adequate (if applicable for hydraulic brakes). Adjust brake sensitivity if possible via settings or mechanic.
Ensure the NFC card is clean and properly aligned with the reader. Try re-pairing the NFC card with the scooter. Check if the scooter's battery is sufficiently charged.
Check the connection between the dashboard and the main controller. If the issue persists, consult the user manual or manufacturer support.
Initial Setup: Upon receiving the Ausom SR1, ensure all components are present and undamaged. Fully charge the battery before the first ride using the provided charger. Familiarize yourself with the NFC locking system by following the initial pairing instructions. Adjust handlebar height for a comfortable riding position.
Compatibility: The scooter is designed for riders up to 130 kg. It charges via standard outlets. USB-A and USB-C ports are compatible with most modern electronic devices for charging.
Care and Maintenance: Keep the scooter clean using a damp cloth; avoid high-pressure water jets. Regularly inspect tire pressure and tread for wear. Check brakes for proper function. Store in a dry place, away from extreme temperatures. The IP54 rating indicates protection against dust ingress and water splashes, so avoid riding in heavy rain or through deep puddles. Periodically check all bolts and connections for tightness.
