Einhell Pressure Washer - 140 Bar

The Einhell TE-HP 140 high-pressure cleaner is designed for efficient cleaning of soiled surfaces ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

This guide is for users of the Einhell TE-HP 140 pressure washer, designed for efficient cleaning tasks. The primary benefit is the washer's high pressure and flow rate, allowing for quick cleaning of soiled surfaces. However, note that a power outlet is required for operation. This guide covers the key features, setup, usage, and maintenance of your Einhell pressure washer, including troubleshooting tips and FAQs.

All features

Model Part Number4140760
BrandEinhell

Extended Product Information

FAQs

How do I prime the pressure washer?

Connect the water supply and turn on the water. Point the gun away from yourself and turn the pressure washer on. Squeeze the trigger until water comes out.

What type of detergent should I use?

Use detergents specifically designed for pressure washers. Avoid using household detergents, as they may damage the machine.

How do I store the pressure washer?

Drain the water from the hose and pump. Store the unit in a dry, frost-free place. Coil the hose and store accessories in the designated areas.

Can I use hot water with this pressure washer?

No, the maximum water temperature is 40°C.

How do I clean the nozzles?

Use the cleaning needle (if provided) to remove any debris from the nozzle openings. Rinse the nozzle with clean water.

What is the warranty period?

The warranty period is determined by local regulations; check your purchase documentation for specific details.

Where can I find replacement parts?

Replacement parts can be found at authorized Einhell dealers or online retailers. Make sure to use the model number (MPN: 4140760) when searching for parts.

How do I prevent the pressure washer from freezing?

In cold weather, disconnect the water supply, run the machine briefly to remove water, and store it in a warm location.

Troubleshooting

Pressure washer does not start.

Check the power supply and ensure the machine is plugged in correctly. Check that the power switch is in the 'on' position.

Water pressure is too low.

Check the water supply and ensure that the water inlet filter is clean. Also, inspect the nozzles for blockages and clear if necessary.

Detergent is not dispensing.

Make sure the detergent tank is filled, and the detergent nozzle is properly attached. Check that the siphon tube is not blocked.

Pressure washer leaks.

Check the hose connections and tighten if necessary. Inspect the seals and O-rings for wear and tear, and replace them if needed.

Pressure washer stops unexpectedly.

The motor may have overheated. Turn off the machine and allow it to cool down. Check for any obstructions that may be causing the motor to work harder than necessary.

Pros and Cons

Pros

  • High pressure and flow rate for efficient cleaning.
  • Compact and mobile design with wheels for easy transport and storage.
  • Integrated detergent tank simplifies the cleaning process.
  • Includes a variety of accessories for different cleaning tasks.
  • Automatic on/off function increases ease of use.
  • The 5m pressure hose provides good reach for cleaning.

Cons

  • Requires access to a power outlet for operation.
  • Hose length may be limiting for some larger areas.
  • The 1.2L detergent tank capacity might require frequent refills for larger cleaning jobs.
  • The maximum water temperature is limited to 40°C.
  • Requires assembly before first use.
  • May require a separate water source.

Setup, Compatibility & Care

Setup:

  1. Assemble the pressure washer according to the included instructions.
  2. Connect the pressure hose to the gun and the pressure washer.
  3. Attach the desired nozzle to the gun.
  4. Connect the garden hose to the water inlet.
  5. Plug the power cord into a suitable outlet.

Compatibility:

  • The pressure washer is compatible with standard garden hoses.
  • Ensure your water source has sufficient pressure and flow.
  • Use only detergents specifically designed for pressure washers.

Care:

  • After each use, disconnect the water and power supply.
  • Empty the detergent tank after each use.
  • Store the pressure washer in a dry, frost-free location.
  • Clean the water filter regularly to prevent blockages.
  • Inspect the hose for damage before each use.