SecureFix Direct Shock Cord Hooks - 10mm - 10 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SecureFix Direct Shock Cord Hooks are an essential hardware solution for DIY enthusiasts, outdoor adventurers, and professionals who need to create custom tie-down systems. These 10mm hooks allow you to fashion bespoke shock cord assemblies tailored to specific cargo securing tasks, providing a secure and versatile anchor point. While they offer excellent utility for heavy-duty nylon cord projects, users should note that they require separate components like shock cord, pliers, and ring clamps to complete a functional assembly.
All features
| Material | Nylon |
|---|---|
| Model Part Number | SFNH210 |
| Brand | SecureFix Direct |
Extended Product Information
FAQs
Are these hooks sold with the shock cord included?
No, these are sold as a pack of 10 hooks only. You must source your own 10mm shock cord separately.
Can these be used for overhead lifting applications?
No. These hooks are designed for securing cargo and tie-down purposes only and should never be used for lifting or safety-critical overhead suspension.
What tools do I need to complete the assembly?
You will need a pair of pliers suitable for crimping ring clamps and potentially wire cutters to size your shock cord.
Do I need ring clamps to attach these?
Yes, it is highly recommended to use ring clamps to provide a secure, permanent attachment between the hook and the shock cord.
Are these hooks resistant to UV light?
While the nylon construction is durable, prolonged direct UV exposure can degrade plastics over many years. It is recommended to store them away from direct sun when not in use.
Can I use these on a boat?
Yes, the nylon material is suitable for marine environments, though they should be rinsed with fresh water if exposed to salt spray.
Troubleshooting
Cord slips out of the hook after assembly
Ensure the ring clamp is crimped tightly enough to bite into the nylon cord and prevent slippage.
Snap clip is stiff or difficult to open
Apply a small amount of silicone-based lubricant to the hinge point and cycle the clip several times to distribute it.
Hook does not fit the shock cord
Verify the shock cord is exactly 10mm in diameter, as over-braided cords may have a larger effective diameter.
Pros and Cons
Pros
- Durable nylon build ensures long-term reliability
- Snap clip adds crucial security against accidental detachment
- Versatile application for DIY cargo nets and tie-downs
- Sufficient pack size for multiple hardware assemblies
Cons
- Requires separate tools like pliers for proper crimping
- Not compatible with shock cords significantly smaller than 10mm
- Requires additional purchase of ring clamps to secure the cord to the hook
Setup, Compatibility & Care
To assemble these hooks, ensure you have a length of high-quality 10mm shock cord, compatible ring clamps, and a pair of professional-grade crimping pliers. Start by threading the shock cord through the designated eyelet on the hook. Once the cord is positioned, slide a ring clamp over the cord tail to cinch it tightly against the hook's base. Use your pliers to compress the ring clamp firmly, ensuring no slack remains. For maintenance, periodically inspect the nylon hooks for signs of stress fractures or fatigue, especially after extreme cold or heat exposure. If the snap clip tension becomes loose, inspect the pivot point for debris and clean with compressed air if necessary.