VidaXL Cabinet Handles - Silver - 64 mm - 20 pcs
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These VidaXL cabinet handles are designed for homeowners looking to add a simple yet elegant touch to their cabinets and drawers. Their key benefit lies in their durable stainless steel construction and versatile screw length, which can be cut to suit various board thicknesses. A potential caveat is the need for precise measurement and cutting of screws for optimal fit on different cabinet depths.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 3203635 |
| Brand | VidaXL |
Extended Product Information
FAQs
What material are the cabinet handles made from?
The handles are made from durable stainless steel with a brushed finish.
What is the center hole spacing for these handles?
The center hole spacing is 64 mm.
Can I use these handles on thick cabinet doors?
Yes, the provided screws are cuttable, allowing you to adjust them for board thicknesses between 12 mm and 36 mm.
How many handles are included in a pack?
Each pack contains 20 cabinet handles and 40 screws.
What is the color of the handles?
The handles are silver with a brushed finish.
Are these handles suitable for outdoor use?
While made of stainless steel with rust resistance, they are primarily designed for indoor cabinet applications. Prolonged outdoor exposure may affect the finish.
What tools are needed for installation?
You will need a measuring tape, a cutting tool (like a hacksaw) for the screws, and a screwdriver for installation.
Troubleshooting
Screws are too long or too short.
Ensure you have measured the board thickness accurately and cut the screws to the correct length before installation. The suitable board thickness is 12-36 mm.
Handle does not align with existing holes.
Verify that the center hole spacing of your existing holes is 64 mm. If not, you may need to drill new holes or use filler for the old ones.
Brushed finish appears dull or scratched.
Clean gently with a damp cloth and mild soap. Avoid abrasive materials. For minor scratches, try buffing gently in the direction of the brushed grain with a soft microfiber cloth.
Pros and Cons
Pros
- Durable and rust-resistant stainless steel material.
- Modern, minimalist design fits various decors.
- Cuttable screws offer flexibility for different cabinet thicknesses.
- Cost-effective bulk pack of 20 handles.
Cons
- Requires manual cutting of screws for proper fit.
- Brushed finish may show fingerprints more readily than polished surfaces.
- Minimalist design might not suit highly ornate cabinetry.
Setup, Compatibility & Care
Setup:
- Determine the required screw length based on your cabinet or drawer board thickness (12-36 mm).
- Using a suitable cutting tool (e.g., a hacksaw), carefully cut the provided screws to the desired length.
- Align the handle with the pre-drilled holes on your cabinet or drawer front.
- Insert the cut screws from the inside of the cabinet/drawer and fasten them into the handle.
Compatibility:
- Suitable for boards with a thickness of 12 mm to 36 mm.
- Requires pre-drilled holes with a center hole spacing of 64 mm.
- Ideal for cabinets, drawers, cupboards, wardrobes, lockers, and wooden cases.
Care:
- Clean with a soft, damp cloth.
- Avoid using abrasive cleaners or harsh chemicals that could damage the brushed finish.
- Dry thoroughly after cleaning to prevent water spots.