Ideal pumping solution for a low level shower tray. Capable of pumping a standard electric or gravity mixer shower. Two inlets mean a wash basin can be added too. Suits low level shower trays of 80mm and over. Overcomes gravity drainage issues and allows basement showers. Two part kit with shower flat pump plus gully and waste. Pumps up to 3m vertically or 30m horizontally. The shower pump can be installed next to a shower tray and overcomes gravity drainage issues so could allow for a shower in a basement. It is discharged through 22 or 32 mm pipework. The Sanishower flat has a low activation level and suits low level shower trays of 80 mm and over. Weight: 4.7 kg. Number of available inlets: 2. Inlet diameter: 16 mm. Recommended discharge pipe diameter: 32 mm (shower) - 40 mm (washbasin). Motor power: 250 W. Supply voltage: 220-240V/50Hz. Electrical class: 1. IP rating: IP44. Maximum horizontal discharge: 30 m. Maximum vertical discharge: 3 m. Activation level: 30 mm. Maximum current consumption: 1.3 A. Dimensions l x w x h (mm): 295 x 162 x 144. Key features: Compatible with electric/gravity shower, and wash basin. Suitable for domestic applications. Suits shower trays of 80mm and over. Easy service access through convenient covers - no need to remove the unit. 46dB Noise Volume. Practical for new installations. 2-year guarantee as standard. Have you dreamed about turning your loft into an added bedroom with en suite? Or maybe your spare room has seen better days so you’ve decided to turn it into something more practical? With the Sanishower Flat by Saniflo, it is possible to convert any room you want into a shower room. With twin inlets on the unit you also have the option to include a wash basin. For more than 50 years, Saniflo have wanted to make the installation of additional bathrooms and toilets as easy as possible. As the inventor of the now famous macerator system, Saniflo are the market leaders. Their products are identified as high quality and conform to the strictest approvals and technical requirements. The Saniflo Flat is a grey water pump that discharges to the mains sewage system. They are also more hygienic than you would think and the unit doesn’t encourage any bad smells. As long as it is used and installed correctly your new shower room will be in safe hands. The unit is activated automatically by the incoming water, the water is then forced through the discharge pipework and finally through the non-return valves preventing any waste or water from returning to the unit. Standard toilet cleaners are suitable for general cleaning however you are advised against any types which create a high level of foam. These could cause temporary complications in the pump. 2 Inlets: A 2 inlet lifting station for grey water connects to the following products: Washbasin, Shower. Unit Technical Data: Inlet size: 32/40mm. Outlet size: 22/32mm. Double inlet connection on the side. One can be plugged in if you only require a single inlet. Suitable for bathrooms with an IP44 rating. Average temperature: 35 Degrees Centigrade. Electrical Supply: 220-240 /50. Iso: EN 12050-2. Wattage: 250w. Motor RPM: 2800 RPM. Discharge pipe diameter: 22/32mm. Noise level: 46dB. Minimum shower tray height required: 40mm. Discharge Lengths: Vertical Discharge: 3m. Horizontal Discharge: 30m. Unit Dimensions: Height: 162mm. Width: 295mm. Depth: 144mm. All Saniflo guarantees need to be registered directly with Saniflo. Please click here to do this.