Delkin Fat Gecko Three-Arm Suction Mount - Delkin Devices
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Delkin Fat Gecko Triple Mount is designed for photographers and videographers seeking stable camera placement on smooth, non-porous surfaces, even in challenging conditions. Its primary benefit is the enhanced stability provided by three industrial-grade suction cups, enabling unique shooting angles. A potential caveat is that its effectiveness is dependent on the surface being clean and smooth.
All features
| Brand | Delkin Devices |
|---|
Extended Product Information
FAQs
What is the maximum weight the Fat Gecko Triple Mount can support?
The mount is rated to support up to 8 lbs (3.63 kg).
Can I use this mount on a textured surface?
The mount is designed for smooth, non-porous surfaces. Performance on textured surfaces is not guaranteed and may be unreliable.
How do I clean the suction cups?
Clean the suction cups with a damp cloth. If necessary, use a mild soap and water solution, then rinse and allow to air dry completely before use.
What type of cameras is this mount compatible with?
It is compatible with most cameras featuring a standard 1/4"-20 tripod thread, including DSLRs, action cameras, and camcorders.
Will this mount work on a car windshield?
Yes, provided the windshield is clean and smooth, the triple suction system should provide a secure attachment.
How does this mount help reduce vibration?
The mount includes a rubber washer and a tightening knob designed to dampen vibrations, especially useful on moving surfaces or in windy conditions.
What are the main advantages of the triple-arm design?
The triple-arm design offers significantly increased stability compared to single-mount systems, making it ideal for heavier cameras or more demanding shooting conditions.
Troubleshooting
Suction cups not adhering firmly
Ensure the mounting surface is perfectly clean, dry, and smooth. Clean the suction cups themselves with a damp cloth and reapply, ensuring all air is expelled.
Camera appears unstable or wobbly
Check that all adjustment knobs and the central locking mechanism are fully tightened. Verify the camera's weight does not exceed the 8 lbs (3.63 kg) capacity.
Difficulty adjusting the camera angle
Loosen the relevant adjustment knobs slightly before repositioning. Ensure the joints are not obstructed. Re-tighten knobs securely after positioning.
Mount detaches unexpectedly
This indicates a potential issue with the surface or the mounting process. Re-evaluate the surface condition and re-mount following the setup instructions carefully, ensuring a strong seal on all three cups.
Pros and Cons
Pros
- Provides exceptional stability with its triple suction cup design.
- Offers extensive adjustability for capturing unique angles.
- Durable construction suitable for demanding environments.
- Universal compatibility with most cameras.
- Effectively reduces vibration for professional results.
Cons
- Requires a smooth, non-porous surface for optimal performance.
- May not adhere effectively to textured or dirty surfaces.
- The three-arm design can be bulkier than single-mount systems.
- Weight capacity might be insufficient for very heavy professional cinema cameras.
Setup, Compatibility & Care
Setup:
- Ensure the desired mounting surface is clean, dry, and free of dust or debris. This is critical for secure adhesion.
- Position the three suction cups onto the surface.
- Press down firmly on each suction cup to expel air. You should hear or feel them lock into place.
- Adjust the camera angle using the pivoting and ball joints. Secure each adjustment point with the locking knobs.
- Attach your camera to the 1/4"-20 tripod thread, ensuring it is tightened securely, using the rubber washer and knob if needed.
Compatibility:
- Surface: Best suited for smooth, non-porous surfaces such as glass, polished metal, high-gloss plastic, and fiberglass.
- Cameras: Compatible with DSLRs, mirrorless cameras, action cameras, camcorders, and other devices with a standard 1/4"-20 tripod mount, up to 8 lbs (3.63 kg).
Care:
- Clean suction cups regularly with a damp cloth and mild soap if necessary to maintain adhesion. Avoid abrasive cleaners.
- Store the mount in a cool, dry place when not in use.
- Periodically check all knobs and connections for tightness before each use.
- If the suction cups lose their grip, re-clean the surface and the cups. Ensure air is fully expelled during mounting.