Corrosion Block Anti Corrosion Industrial / Marine Formula - 1 Quart (0.946L)
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Corrosion Block Anti Corrosion Industrial / Marine Formula (1 Quart) is designed for professionals and serious enthusiasts in industrial and marine environments seeking superior protection against corrosion. Its key benefit is its ability to penetrate deeply, displace water, and form a long-lasting barrier against rust and environmental damage, even in extreme conditions. A potential caveat is its slightly thicker consistency compared to other formulas, which may require specific application techniques.
All features
| Model Part Number | 20032 |
|---|---|
| Brand | Corrosion Block |
Extended Product Information
FAQs
How long does the protection last?
The protection is active for 12-18 months, depending on environmental conditions and exposure.
Is this product safe for electronics?
Yes, it is approved for use on engines and electronics, containing no harmful additives like silicon or wax.
Can I use this on painted surfaces?
Yes, it is generally safe for painted surfaces, but always test on an inconspicuous area first to ensure compatibility.
How should I apply Corrosion Block?
Apply to a clean, dry surface using a brush, cloth, or spray. Ensure even coverage and allow it to creep into crevices.
What is the difference between this and ACF-50?
This Industrial/Marine Formula has a slightly thicker carrier than ACF-50, making it a high-adherence creeping fluid and an outstanding de-watering fluid.
Does it wash off in water?
No, the formula is not water-soluble, ensuring it remains effective even in wet conditions.
Can I paint over Corrosion Block?
Corrosion Block is not designed to be painted over directly. It is a protective coating. For painting, it's typically recommended to remove the coating first.
Troubleshooting
Product appears too thick for spray application.
Ensure the product is adequately warmed to room temperature. If using a specific spray applicator, consult its manual for viscosity recommendations. For extremely cold conditions, a slightly thicker carrier can be managed with appropriate application pressure or by thinning slightly with a compatible solvent if recommended by the manufacturer for specific spray systems (though not typically advised for general use).
Uneven application or coverage.
Shake the product vigorously before and during use. Ensure the application surface is clean and dry. Use a brush or cloth for more controlled application in tight areas, or adjust spray nozzle settings for a finer mist. A second light coat may be applied after the first has set if full coverage is not achieved.
Existing corrosion not completely removed.
Corrosion Block is designed to halt and prevent the spread of existing corrosion, not necessarily to remove heavy scale physically. For best results, lightly abrade heavy rust buildup before application. Multiple applications may be necessary for severely corroded areas to penetrate and stabilize the material.
Pros and Cons
Pros
- Provides exceptional, long-lasting corrosion protection in harsh environments.
- Effectively displaces moisture, critical for marine and industrial settings.
- Safe for use on sensitive engine components and electronics.
- Acts as both a penetrant and a lubricant, offering dual functionality.
- Its active ingredients remain effective for up to 18 months.
Cons
- Thicker consistency may require more effort to apply in some situations.
- Specific application methods might be necessary to achieve optimal creep into tight areas.
- Requires careful application to avoid overspray on unintended surfaces.
Setup, Compatibility & Care
Setup: Shake the container well before use. Apply using a brush, cloth, or spray applicator to a clean, dry surface. For optimal results, ensure the surface is free of loose rust and debris. A thin, even coat is recommended.
Compatibility: Corrosion Block is approved for use on aircraft engines and electronics, making it suitable for a wide range of metal surfaces. It is compatible with most common metals and finishes. It does not contain silicon, wax, resin, tar, asphalt, or Teflon, ensuring broad compatibility.
Care: Store the product in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed when not in use. Periodically check treated areas for optimal protection, especially after prolonged exposure to extreme conditions. Reapply as needed, typically every 12-18 months, or sooner if signs of wear or damage to the protective layer are observed.