Frenchic Trim Paint - Cream


Currently unavailable


Currently unavailable
This guide is for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and more with a sophisticated cream finish. The key benefit is its all-in-one formulation, reducing preparation and finishing time. A minor caveat is that coverage estimates are based on a single coat, with two recommended for optimal durability. Frenchic Trim Paint in Cream offers a pale, cool, and captivating light neutral tone, designed for easy application with a soft satin sheen. It's a water-based, low VOC, and low odour paint that acts as its own primer and topcoat, providing a robust and scuff-resistant finish suitable for a variety of surfaces.
| Colour | Cream |
|---|---|
| Model Part Number | 39780693901399 |
| Brand | Frenchic |
No, Frenchic Trim Paint is designed to be self-priming and self-sealing. This means you can apply it directly to most prepared surfaces without needing a separate primer or topcoat for a durable finish.
While one coat provides coverage, we recommend applying two thin coats for a more durable and opaque finish, especially for furniture and high-traffic areas.
It is suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, furniture (wood and laminate), and is safe for children's toys.
A 500ml tin covers approximately 7m² with a single coat. With two recommended coats, expect coverage of around 3.5m².
Clean your brushes and tools immediately after use with warm, soapy water. Rinse thoroughly.
No, Frenchic Trim Paint is specifically formulated for interior use only. It is not weather-resistant.
The 'Cream' color in Frenchic Trim Paint has a soft-satin sheen.
Stir the paint thoroughly. If still very thick, you can add a tiny amount of water (no more than 5%) to thin slightly, but this may affect the finish. Ensure the ambient temperature is not too cold.
Apply thin, even coats. Avoid over-brushing. Ensure you are using a good quality brush suitable for water-based paints. Allow adequate drying time between coats.
Ensure the surface was properly cleaned and lightly sanded beforehand if necessary. Check that no oily or waxy residues remain. Make sure the surface is completely dry before painting.
Check temperature and humidity. Ensure adequate ventilation. Very high humidity or low temperatures can slow drying and curing times. Avoid applying too thickly.
Setup: Ensure the surface is clean, dry, and free from grease or dust. For best adhesion, especially on laminate or previously painted surfaces, a light sanding with fine-grit sandpaper is recommended, followed by wiping away dust. Stir the paint thoroughly before use. Apply with a good quality synthetic brush or roller.
Compatibility: Suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, most furniture (including wood and laminate), and children's toys (EN71-3 certified).
Care: Clean application tools immediately after use with warm, soapy water. For general cleaning of the painted surface, use a soft, damp cloth. Avoid abrasive cleaners or excessive scrubbing, as this can damage the finish.