V-Tech Threadlocker - Blue
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using V-Tech Threadlocker - Blue to secure and seal bolts and nuts. The primary benefit is preventing loosening of fasteners due to vibration. Keep in mind that this threadlocker is designed for bolts and nuts up to 20mm in diameter.
All features
| Colour | Blue |
|---|---|
| Model Part Number | VT-843 |
| Brand | VTech |
Extended Product Information
FAQs
What is V-Tech Threadlocker - Blue used for?
It is used to secure and seal bolts and nuts, preventing them from loosening due to vibration, especially in vehicles and machinery.
What size bolts can I use this on?
It is suitable for bolts and nuts up to 20mm in diameter.
Is it resistant to chemicals?
Yes, it is resistant to fuels, lubricants, and many industrial liquids and gases.
Can I use it on lightly oiled surfaces?
Yes, it is designed to work on lightly oiled surfaces.
How do I apply V-Tech Threadlocker - Blue?
Apply to the threads of the bolt, assemble the bolt and nut, and then allow it to cure fully.
How should I store it?
Store in a cool, dry place and avoid direct sunlight.
How do I remove a bolt or nut secured with V-Tech Threadlocker - Blue?
Use standard tools. Depending on the application, you may need additional force.
Troubleshooting
Bolt or nut is still loose after application.
Ensure the threads were properly cleaned. Verify that the correct amount of threadlocker was used. Check the torque specification after application.
Threadlocker is not adhering properly.
Make sure the surfaces are not excessively oily. Ensure that the threadlocker has not expired. Apply the threadlocker to both the bolt and nut threads.
Pros and Cons
Pros
- Effectively prevents loosening of bolts and nuts.
- Resistant to a wide range of chemicals.
- Works on lightly oiled surfaces, simplifying application.
- Provides a secure seal for various applications, particularly in vehicles and machinery.
Cons
- Limited to bolts and nuts up to 20mm in diameter.
- Medium strength may not be suitable for all applications.
- Removal may require more force than lower strength threadlockers.
Setup, Compatibility & Care
- Preparation: Clean the bolt and nut threads to remove any dirt or grease. A clean surface ensures optimal adhesion.
- Application: Apply the threadlocker to the threads of the bolt.
- Assembly: Assemble the bolt and nut to the desired torque specification.
- Curing: Allow the threadlocker to cure fully. The curing time can vary, so refer to the product instructions for specific guidance.
*Compatibility:* Compatible with most metals used in vehicles and machinery. Avoid use on plastics.
*Care:* Store in a cool, dry place. Avoid prolonged exposure to direct sunlight. Properly dispose of any excess or used product in accordance with local regulations.