Phoenix Contact QPD STAK 3PE Connector Black - 1065121
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Phoenix Contact 1065121 QUICKON connector is designed for professionals needing robust, time-saving electrical connections in industrial settings. Its key benefit is the innovative QUICKON connection technology, reducing assembly time by up to 80% without special tools. A potential consideration is its specific wire cross-section and cable diameter limitations.
All features
| Model Part Number | 1065121 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What makes the QUICKON connection technology time-saving?
QUICKON technology allows for fast, tool-free connections by simply inserting the prepared wire into the terminal, which then secures it automatically. This significantly reduces the time compared to traditional screw terminals or crimping.
What is the maximum wire size this connector can handle?
The connector supports wire cross-sections from 0.5mm² up to 1.5mm², which corresponds to approximately 16-20 AWG.
Is this connector suitable for outdoor use?
Yes, with an IP54 rating, it offers protection against dust ingress and splashing water, making it suitable for many industrial and exposed environments.
What are the operating temperature limits?
The operating and storage temperature range for this connector is -40 °C to 100 °C.
Does the connector have protection against incorrect wiring?
Yes, it features mechanical coding to protect against mismatching connections, enhancing safety and reliability.
What is the voltage and current rating?
The connector is rated for 250-400V and can handle a current of up to 16A.
How do I maintain the connector?
The connector is designed for low maintenance. If cleaning is required, use a dry or slightly damp cloth. Ensure connections are dry before energizing.
Troubleshooting
Connection not secure
Ensure the wire is stripped to the correct length and fully inserted into the terminal. Verify the external cable diameter is within the specified range (7-13mm).
Connector does not engage
Check for any obstructions in the terminal or the mating connector. Ensure the wire is properly prepared and aligned.
Intermittent power loss
Inspect the silver-plated contacts for any signs of contamination or damage. Ensure strain relief is properly applied.
Water ingress suspected
Verify that the IP54 seal is intact and that the cable diameter is correctly matched to the connector's gland. Ensure all mating surfaces are clean and properly seated.
Pros and Cons
Pros
- Significantly reduces connection time, boosting efficiency.
- Easy and intuitive assembly process, even for less experienced personnel.
- Reliable and secure connections suitable for industrial environments.
- Enhanced safety features like mechanical coding and touch-proof protection.
- Durable construction with IP54 rating for protection against environmental factors.
Cons
- Limited to specific wire cross-sections (0.5mm² to 1.5mm²).
- Requires external cable diameters within a specified range (7mm to 13mm).
- Primarily designed for straight plug connections, limiting flexibility in some layouts.
- Black color might not be suitable for all aesthetic requirements.
Setup, Compatibility & Care
Setup:
- Strip the wire to the appropriate length as per the connector's specifications.
- Insert the stripped wire into the corresponding terminal.
- Push the wire firmly until it clicks into place with the QUICKON nut. Ensure a secure connection is made without the need for tools.
- If using a plug, align with the socket and push until it locks.
Compatibility:
- Wire Cross-Section: Compatible with wire sizes from 0.5mm² to 1.5mm² (approximately 16-20 AWG).
- External Cable Diameter: Suitable for cables with diameters ranging from 7mm to 13mm.
- Voltage/Current: Rated for 250-400V and up to 16A.
Care:
- The connector requires minimal care due to its robust design.
- If cleaning is necessary, use a dry or slightly damp cloth. Avoid abrasive cleaners or solvents.
- Ensure connections are always dry before applying power.