JDiction UV Resin - 300g - Hard UV Resin
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY crafters seeking a premium, crystal-clear hard UV resin for projects like doming, sealing, and coating. The key benefit is its high viscosity, slow-flow formula which allows for precise application and a bubble-free, high-gloss finish with excellent anti-yellowing properties. A minor caveat is that its high viscosity requires careful pouring and handling to avoid excessive air entrapment. JDiction UV Resin is an upgraded formula designed for minimal odor and safety, ensuring bright and long-lasting creations.
All features
| Model Part Number | UV Resin-005 |
|---|---|
| Brand | JDiction |
Extended Product Information
FAQs
What is the best way to apply JDiction UV Resin?
Pour the resin slowly onto your project surface or into your mold. Use a silicone tool or toothpick for spreading or positioning if needed. Ensure the surface is level for an even cure.
How long does it take to cure?
Curing time typically ranges from 2-5 minutes under a UV/LED lamp (6W or higher). Thicker pours or lower wattage lamps may require longer curing times.
Can I mix colors or pigments into this resin?
Yes, you can mix resin tints, mica powders, or other compatible resin colorants. Add colorants sparingly to avoid affecting the curing process or clarity.
Is this resin flexible?
No, JDiction UV Resin is a hard UV resin designed to cure into a rigid, durable finish. It is not suitable for projects requiring flexibility.
What kind of UV lamp should I use?
A UV/LED lamp with a minimum of 6W is recommended for effective and complete curing. Higher wattage lamps will cure faster.
How do I clean up uncured resin?
Wipe away uncured resin immediately with paper towels or a cloth soaked in isopropyl alcohol. Ensure the area is well-ventilated when using alcohol.
What is the shelf life of this resin?
When stored properly in a cool, dark place with the cap sealed tightly, the resin typically has a shelf life of 6-12 months.
Troubleshooting
Resin remains sticky or uncured
Ensure you are using a UV/LED lamp of sufficient wattage (at least 6W recommended) and curing for the recommended time (typically 2-5 minutes depending on lamp and thickness). Check that the resin is not too thick and that your UV lamp is functioning correctly.
Excessive bubbles after curing
Pour the resin slowly and steadily. Gently warm the resin bottle in warm water (do not use heat gun) before pouring if it is very cold. Tap the mold gently on your work surface after pouring to help release trapped air. Avoid vigorous mixing.
Yellowing of the cured resin
Ensure the resin is stored properly away from UV light and heat. Use the resin within its recommended shelf life. If yellowing occurs, it may be due to prolonged exposure to sunlight or inadequate UV inhibitors in older batches. Ensure proper curing time.
Resin is too thick to pour easily
Gently warm the bottle of resin in a bowl of warm water for 10-15 minutes before use. Do not microwave or use direct heat. This will lower the viscosity temporarily, making it easier to pour.
Pros and Cons
Pros
- Provides a durable, glass-like hard finish.
- Slow flow allows for precise application and control.
- Resists yellowing due to UV inhibitors.
- Achieves a bubble-free, high-gloss result.
- Low odor for a better user experience.
Cons
- High viscosity may require gentle mixing to avoid introducing air.
- Requires a UV lamp for curing, adding to initial setup cost.
- Not suitable for flexible resin applications.
- Curing time can vary depending on UV lamp power and resin thickness.
Setup, Compatibility & Care
Setup: Ensure you are working in a well-ventilated area. Have your silicone molds or application surface ready. You will need a UV/LED lamp (typically 6W or higher) for curing.
Compatibility: JDiction UV Resin is compatible with most silicone molds and can be used on various surfaces like metal, wood, plastic, and painted items, provided they are clean and dry. It is designed to cure hard and is not suitable for projects requiring flexibility.
Care: Store the resin in a cool, dark place, away from direct sunlight and heat. Keep the cap tightly sealed when not in use. Clean up uncured resin immediately with isopropyl alcohol. Cured resin can be cleaned with mild soap and water.