Filter Cartridge for TITAN Wet & Dry Vacuum - TTB350, TTB351VAC, TTB430VAC
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This SPARES2GO filter and dust bag kit is designed for owners of Titan wet and dry vacuum cleaners who need to maintain consistent suction power and effective filtration during heavy-duty cleaning tasks. The set provides an essential refresh for your machine, ensuring debris is captured reliably; however, users should verify their specific vacuum model number against the compatibility list before purchase to ensure a secure fit.
All features
| Colour | Multicolor |
|---|---|
| Model Part Number | TTB350, TTB351VAC, TTB430VAC |
| Brand | SPARES2GO |
Extended Product Information
FAQs
Can I use the dust bag for wet vacuuming?
No, dust bags are intended for dry vacuuming only. Remove the bag before attempting to vacuum liquids.
How often should I change the filter?
The frequency depends on usage, but we recommend replacing the filter whenever it becomes discolored, damaged, or when suction performance noticeably drops.
Is the cartridge filter washable?
This filter is designed primarily for dry filtration; washing it may compromise the material structure. We recommend using dry cleaning methods like tapping or compressed air.
Does this kit include a locking nut for the filter?
This kit includes the filter and dust bags. It typically uses your existing vacuum's locking hardware.
Will this fit my Titan TTB430VAC?
Yes, this kit is specifically compatible with the TTB430VAC model.
Troubleshooting
Suction power remains low after installation
Check the hose for obstructions and ensure the dust bag collar is properly seated on the inlet.
Dust is escaping into the canister
Verify that the rubberized seal on the dust bag is intact and pushed fully against the vacuum intake port.
Filter will not stay in place
Ensure the internal retaining nut or locking mechanism is tightened securely against the top of the cartridge filter.
Pros and Cons
Pros
- Complete kit provides both filtration and collection components
- Rubberized bag seals prevent debris leakage during disposal
- Helps restore vacuum suction to factory-like performance
- Cost-effective alternative to individual replacement parts
Cons
- Not compatible with every Titan model, strictly limited to the listed series
- Filter needs periodic cleaning to maintain its lifespan
- Requires manual installation of the retaining collar
Setup, Compatibility & Care
Compatibility
This kit is compatible with the following Titan vacuum models:
- TTB350
- TTB351VAC
- TTB430VAC
Installation
- Ensure the vacuum is powered off and unplugged.
- Open the vacuum canister and remove the old cartridge filter by unscrewing the locking nut or pulling the release clip.
- Install the new filter by aligning it with the intake port, ensuring a snug fit against the motor seal.
- Attach the new dust bag by sliding the solid retaining collar onto the vacuum inlet until it clicks or seats firmly in place.
Care
To extend the life of the cartridge filter, avoid washing it unless it is specifically designated for wet use; instead, use compressed air to blow out debris from the inside out. Replace the dust bag as soon as it reaches 3/4 capacity to prevent suction loss.