DuraTech Oil Absorption Syringe - 200CC
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The DuraTech 200CC Oil Absorption Syringe is a professional-grade fluid extraction tool designed for mechanics, hobbyists, and DIY enthusiasts who need to handle engine oil, brake fluid, or gear oil in tight spaces. Its primary benefit is the combination of a 200cc high-capacity cylinder and an auto-locking copper adapter, which ensures spill-free fluid transfers in vehicles ranging from ATVs to agricultural equipment. While this tool is incredibly efficient for general fluid maintenance, users should note that the included tubing is specifically calibrated for 7mm and 8mm connections, which may limit compatibility with non-standard hose sizes without additional adapters.
All features
| Model Part Number | 200cc |
|---|---|
| Brand | DURATECH |
Extended Product Information
FAQs
Can I use this for brake fluid?
Yes, the syringe is compatible with brake fluid, though you should clean the unit thoroughly immediately after use to prevent seal degradation.
What size tubes work with the copper adapter?
The adapter is designed for 7mm and 8mm PU tubing.
Is the cylinder resistant to chemical damage?
The cylinder is made from durable transparent material designed to withstand standard automotive fluids, but it is not intended for long-term storage of corrosive chemicals.
How do I clean the inside of the syringe?
Draw a mixture of warm water and mild detergent through the syringe several times, then rinse with clean water and air dry with the plunger removed.
Does this tool come with replacement seals?
Check your packaging for included spares, but generally, the double-seal design is intended for long-term durability with regular maintenance.
Troubleshooting
Plunger is difficult to pull or push.
Apply a small amount of clean engine oil or silicone lubricant to the rubber seals to improve slide efficiency.
Loss of suction during operation.
Check that the copper adapter is fully locked and verify the hose is not kinked. Ensure the double rubber pads are properly seated inside the cylinder.
Fluid leaking from the base of the plunger.
Inspect the rubber seals for debris or damage; clean or replace them if the seal is compromised.
Pros and Cons
Pros
- Durable heavy-duty copper adapter ensures a secure grip on hoses.
- High volume capacity reduces time spent on repetitive tasks.
- Clear markings allow for precise fluid volume control.
- Double rubber seal design effectively prevents vacuum leaks.
- Easy to disassemble and clean after use.
Cons
- Limited to 7mm and 8mm tubing connections.
- Requires manual effort for thick viscous fluids.
- Large cylinder size may be cumbersome in extremely narrow cavities.
Setup, Compatibility & Care
Setup is straightforward: ensure the rubber seals are lubricated with a light coating of clean oil before the first use to ensure a smooth plunger action. To connect a tube, firmly push your 7mm or 8mm PU tubing into the copper adapter; the auto-lock will hold it securely in place. After each use, it is critical to flush the syringe with a mild solvent or warm soapy water if the fluid was non-petroleum based. To maintain the vacuum seal, store the plunger slightly depressed, and avoid exposing the rubber seals to harsh chemicals or extreme heat for extended periods. Always ensure the protective caps are secured during storage to prevent dust accumulation inside the cylinder.