Mapei Super Flexible Tile Adhesive - White - 20kg
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to install ceramic, porcelain, or mosaic tiles using the Mapei Super Flexible Tile Adhesive. It provides a strong, durable bond suitable for areas with movement, ensuring your tiles stay in place. However, be aware that proper surface preparation is crucial for optimal adhesion.
All features
| Colour | White |
|---|---|
| Model Part Number | WDB16626 |
| Brand | Mapei |
Extended Product Information
FAQs
What types of tiles can I use this adhesive with?
This adhesive is suitable for ceramic, porcelain, and mosaic tiles.
Can this adhesive be used outdoors?
Yes, it is suitable for both internal and external applications.
How long do I need to wait before grouting?
The curing time will vary; always refer to the manufacturer's instructions on the packaging.
How much adhesive do I need?
Calculate the surface area and refer to the coverage information on the bag, taking into account the size of the tiles and the notch size of the trowel used.
What should I do if the adhesive skins over before I can lay the tiles?
Do not add more water to re-activate the adhesive. Remove the adhesive and apply fresh adhesive.
How do I clean up the adhesive?
Clean up spills and tools with water while the adhesive is still wet. Once dried, it's difficult to remove.
Is this adhesive flexible?
Yes, it is a super flexible adhesive designed to accommodate movement.
Troubleshooting
Tiles are not adhering properly.
Ensure the surface is properly prepared, the adhesive is mixed correctly, and the tiles are pressed firmly into the adhesive. Check the expiration date of the adhesive.
Adhesive is difficult to spread.
Check the water ratio used during mixing. The mix may be too thick; add a little more water as needed, but do not exceed the manufacturer's maximum water recommendation.
Tiles are cracking after installation.
This could be due to excessive movement. Ensure the correct adhesive for the application was used and that expansion joints were incorporated where necessary.
Pros and Cons
Pros
- Excellent flexibility to accommodate movement and prevent tile cracking.
- Suitable for both interior and exterior applications.
- White color is ideal for light-colored tiles, enhancing aesthetics.
- Easy to apply with good workability and non-slump properties.
Cons
- Requires proper surface preparation for optimal adhesion.
- May require more effort to mix compared to pre-mixed adhesives.
- The white color may not be suitable for all tile colors.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, dust, and grease. Prime porous surfaces as recommended by the tile manufacturer.
- Mixing: Mix the adhesive with the appropriate amount of water according to the manufacturer's instructions until a smooth, lump-free consistency is achieved.
- Application: Apply the adhesive using a notched trowel, ensuring full coverage of the tile back.
- Tile Placement: Position the tiles within the open time specified by the manufacturer. Press firmly to ensure good contact.
- Curing: Allow the adhesive to cure completely before grouting. The curing time will vary depending on environmental conditions (temperature, humidity). Follow the manufacturer's recommendations.
Compatibility: Compatible with ceramic, porcelain, and mosaic tiles.
Care: Clean up any spills or excess adhesive immediately with water. Protect the tiled area from heavy traffic during the curing period.