Frenchic Trim Paint - Beige
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Frenchic Trim Paint in Beige is ideal for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and radiators with a sophisticated, neutral finish. Its key benefit is a simplified application process, acting as a self-priming and self-sealing paint that offers a durable, scuff-resistant, soft-satin sheen. A potential caveat is the coverage, where two coats are recommended for optimal durability, effectively halving the coverage per tin for a lasting finish.
All features
| Colour | Beige |
|---|---|
| Model Part Number | 39983680782423 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I need to use a primer before applying this paint?
No, Frenchic Trim Paint is self-priming and self-sealing, meaning no separate primer or top coat is required.
What surfaces can I use this paint on?
It is suitable for interior woodwork, trims, skirting, doors, powder-coated radiators, metal, and most furniture including wood and laminate. It is also safe for children's toys.
How much area does a 500ml tin cover?
A 500ml tin will cover up to 7m² with a single coat. For a more durable finish, two coats are recommended, covering approximately 3.5m².
What kind of finish does this paint have?
The paint provides a soft-satin sheen.
Is this paint suitable for high-traffic areas like kitchen cupboards?
Yes, its robust and scuff-resistant finish makes it suitable for surfaces like kitchen cupboards and built-in furniture.
How should I clean painted surfaces?
Clean the painted surface with a soft, damp cloth. Avoid abrasive cleaners.
What are the environmental benefits of this paint?
It is water-based with low VOCs and low odour, contributing to better indoor air quality.
Troubleshooting
Paint not adhering well
Ensure the surface was properly cleaned and dried. Lightly sand any glossy surfaces before application. Stir the paint thoroughly.
Streaky or uneven finish
Use a good quality brush or roller and apply in thin, even coats. Avoid overworking the paint. Ensure consistent application technique.
Slow drying time
Ensure application is in a well-ventilated area at the recommended temperature. Avoid applying too thickly.
Scuff marks appearing quickly
Ensure two coats have been applied and allowed to cure fully for maximum durability. Avoid harsh cleaning methods.
Pros and Cons
Pros
- Simplified application process due to self-priming and self-sealing properties.
- Durable and scuff-resistant finish suitable for frequent use.
- Low VOC and low odour formulation for a better user experience.
- Versatile use on numerous surfaces including wood, laminate, and metal.
- Safe for children's toys, meeting EN71-3 standards.
- Sophisticated, adaptable neutral colour.
Cons
- Coverage is reduced by half when applying the recommended two coats.
- A soft-satin finish may not be suitable for those preferring a matte or high-gloss look.
- Requires a clean and dry surface for optimal adhesion, like most paints.
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean, dry, and free from grease or dust. Lightly sanding glossy surfaces can improve adhesion. Stir the paint thoroughly before use. Apply with a good quality brush or roller.
Compatibility: This paint is suitable for interior woodwork, trims, skirting boards, doors, metal surfaces (including powder-coated radiators), and furniture made from wood or laminate. It is also certified safe for use on children's toys (EN71-3).
Care: For best durability, apply two coats. Allow adequate drying time between coats and before exposing the surface to heavy use. Clean up brushes and equipment with water immediately after use. For cleaning the painted surface, use a soft, damp cloth. Avoid abrasive cleaners or excessive scrubbing to maintain the finish.