Connect Male Blade Terminal - Red - 6.3mm - 10 Piece Set
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals needing reliable electrical connections for smaller gauge wires. The Connect Red Male Blade Terminal offers a secure and pre-insulated connection for cables ranging from 0.5 mm² to 1.5 mm², ensuring safety and ease of use. A potential limitation is the specific color coding, which may require adherence to existing system standards.
All features
| Model Part Number | 36868 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What size wire can I use with these terminals?
These terminals are designed for wire sizes ranging from 0.5 mm² to 1.5 mm² (approximately AWG 22 to AWG 16).
What does the red color signify?
The red insulation typically indicates that the terminal is intended for specific wire gauges (often 0.5-1.5 mm²) and may be associated with particular voltage or current ratings in some wiring systems.
Do I need a special tool to install these?
Yes, a dedicated crimping tool designed for electrical terminals is required to ensure a secure and reliable connection.
Can these be used for high-current applications?
These terminals are generally suitable for standard electrical applications within their specified wire gauge range. For very high-current applications, verify the terminal's specifications or consult a professional.
Are these terminals weatherproof?
The pre-insulation provides some protection, but the terminals themselves are not inherently weatherproof. For outdoor or wet environments, consider using specialized waterproof connectors or applying additional sealing methods.
How many terminals are in a pack?
Each pack contains 10 Connect Red Male Blade Terminals.
Troubleshooting
Terminal does not crimp securely
Ensure you are using the correct size wire for the terminal (0.5-1.5 mm²) and a suitable, calibrated crimping tool. Re-crimp with firm pressure.
Poor electrical connection / intermittent power
Check that the crimp is tight and the wire is fully seated within the terminal barrel. Inspect for any corrosion on the terminal or mating connector.
Insulation is damaged during crimping
Ensure the crimping tool is not over-crimping and that the stripped wire length is appropriate. The insulation should not be caught in the crimp.
Pros and Cons
Pros
- Provides a secure and reliable electrical connection.
- Pre-insulation enhances safety by preventing accidental shorts.
- Durable copper construction ensures good conductivity.
- Standard 6.3mm size offers wide compatibility.
- Suitable for a common range of wire gauges (0.5-1.5 mm²).
Cons
- Color coding (red) might be restrictive if other colors are required for specific applications.
- Only suitable for wire sizes within the specified range (0.5-1.5 mm²).
- Requires appropriate crimping tools for secure installation.
- Not designed for high-temperature or extremely high-current applications without further specification.
Setup, Compatibility & Care
Setup:
- Select the appropriate wire (0.5 mm² to 1.5 mm²).
- Strip approximately 5-7mm of insulation from the end of the wire.
- Insert the stripped wire into the rear of the terminal.
- Using a suitable crimping tool, crimp the terminal onto the wire, ensuring a secure mechanical and electrical connection.
- Connect the male blade terminal to a corresponding 6.3mm female receptacle.
Compatibility:
- Compatible with mating female blade receptacles of 6.3mm width.
- Suitable for wire gauges ranging from 0.5 mm² to 1.5 mm² (AWG 22-16).
- Best suited for low-voltage DC applications or AC circuits where appropriate.
Care:
- Store in a dry environment to prevent corrosion.
- Ensure connections are properly crimped to maintain integrity.
- Avoid exposing the terminals to excessive moisture or corrosive chemicals.