Hairpin Legs - 16" - 2 Prong - 12mm - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and furniture makers looking for durable and versatile legs for their projects. The key benefit is the 'Ski-Glide' technology, enabling effortless movement of furniture, while a caveat is that the raw steel finish requires user preference for sealing or embracing a rustic look. These 16-inch, 2-prong, 12mm thick hairpin legs in silver are designed for both updating existing furniture and creating new pieces, offering exceptional strength and a wide range of customization.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 5055986112846 |
| Brand | MonsterShop |
Extended Product Information
FAQs
What is the maximum weight capacity per leg?
Each hairpin leg has a maximum weight capacity of 250kg, ensuring robust support for most furniture projects.
What is included in the pack?
The pack includes 4 x Hairpin Legs (16" - 2 Prong - 12mm - Silver), 4 x Clip-on Protector Feet, 4 x Polymer discs with Ski-Glide technology, and a FREE Screw Pack containing 16 x 20mm screws.
Can I paint or seal the raw steel legs?
Yes, the raw steel is designed to be finished by you. You can paint, seal, or leave it untreated for an industrial/retro rust appearance.
How do I use the Ski-Glide technology?
The polymer discs with Ski-Glide technology screw onto the bottom of the legs. Ensure they are securely attached and clean for effortless gliding.
What size screws are provided?
The pack includes 16 x 20mm screws suitable for most common furniture applications.
Are the protector feet and glide discs interchangeable?
Yes, you can use either the clip-on protector feet for standard floor protection or screw on the polymer discs for the Ski-Glide feature. They attach to the same point at the bottom of the leg.
What is the thickness of the steel used?
The steel used for these hairpin legs is 12mm thick, providing significant strength and stability.
Troubleshooting
Legs wobble after installation
Ensure all screws are fully tightened. Check that the furniture surface is flat and that the legs are evenly spaced. If the floor is uneven, adjust the protector feet or glide discs if possible, or consider adding shims.
Screws don't secure properly
Verify you are using the correct screws (provided) for your material. Ensure the material is thick enough for the screws to gain purchase. For very hard materials, pre-drilling a pilot hole slightly smaller than the screw diameter may be necessary.
Ski-Glide discs are not gliding smoothly
Check that the discs are fully screwed in and are clean. Ensure no debris is trapped between the disc and the floor surface. Test on a clean, flat floor.
Rust appearing on raw steel finish
This is expected for raw, unfinished steel. If you wish to prevent further rust, clean the legs thoroughly and apply a sealant, clear coat, or appropriate paint. If the rust appearance is desired, simply wipe clean with a dry cloth.
Pros and Cons
Pros
- Effortless furniture movement thanks to Ski-Glide technology.
- Robust construction supports up to 250kg per leg.
- High degree of customization for aesthetic finish.
- All necessary mounting hardware is included.
- Protects floors with included clip-on feet and glide discs.
Cons
- Raw steel finish requires user decision on sealing or accepting potential rust.
- May require additional finishing steps depending on desired aesthetic.
- 2-prong design might be less stable on very soft surfaces compared to 3-prong variants.
Setup, Compatibility & Care
Setup:
- Ensure you have a suitable surface for assembly (e.g., a workbench or protected floor).
- Position the hairpin legs on the underside of your furniture piece, aligning the prongs with your desired placement.
- Use the provided 20mm screws and a compatible screwdriver or drill to secure each leg through its mounting holes. A pilot hole may be beneficial for harder materials.
- Attach the included clip-on protector feet to the bottom of each leg if not using the Ski-Glide discs.
- For floor protection and mobility, screw on the polymer discs with Ski-Glide technology.
Compatibility:
These legs are compatible with a wide range of materials, including solid wood, MDF, plywood, and composite boards. Ensure the material thickness is sufficient to accommodate the screws.
Care:
- Raw Steel Finish: The raw steel is lightly oiled to prevent immediate rust during transit. For a lasting industrial/retro look, it's recommended to seal the steel with a clear coat spray or wax. Alternatively, you can allow it to develop a natural patina or paint it to your preference. Clean with a dry or slightly damp cloth. Avoid abrasive cleaners that could damage the finish or protective coatings.
- Protector Feet & Glide Discs: Wipe clean with a damp cloth as needed.