U-Pol Guide #7 Dry Powder Coat - 450ml Aerosol - 5 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The U-Pol Guide #7 Dry Powder Coat is an essential tool for professional automotive body technicians and DIY restorers who demand precision during the surface finishing process. Its primary benefit is the clear identification of high and low spots, pinholes, and uneven areas in fillers and primers, which ensures a perfectly level surface before painting. While the powder is highly effective for visual inspection, users must be careful to work in a well-ventilated area, as the fine aerosol mist can easily coat surrounding shop equipment if not managed properly.
All features
| Model Part Number | GUIDE#7-DRYGUIDECOATWETORDRYFILLERPAINT |
|---|---|
| Brand | U-Pol |
Extended Product Information
FAQs
Does Guide #7 replace the need for primer?
No, it is strictly an inspection tool used to identify imperfections in fillers or primers before the final topcoat application.
Can this be used on wet sanding?
Yes, Guide #7 is specifically formulated to be compatible with both wet and dry sanding processes.
Will this leave a residue under my paint?
If used correctly and sanded off as part of your inspection process, it should be completely removed, leaving no residue.
Is it safe to use on plastic bumpers?
Yes, it is safe to use on any surface that requires block sanding, including plastic parts coated in automotive primer.
How long does it take to dry?
Being a dry powder, it is ready for sanding almost immediately after application.
Troubleshooting
Powder is clumping or spraying unevenly
The powder has likely been exposed to moisture. Ensure the can is stored in a dry environment and shake thoroughly for a longer period.
Aerosol nozzle is clogged
Remove the nozzle and soak it in a small amount of solvent, or replace it with a standard spare aerosol nozzle.
Pros and Cons
Pros
- Does not clog or blind abrasive paper
- Visible on all common primer and filler colors
- Suitable for both wet and dry sanding methods
- Easy to apply and remove
- Helps achieve a professional, flat finish
Cons
- Aerosol mist can spread if not controlled
- Requires careful storage to keep powder dry
- Not suitable for use as a primer or final coating
Setup, Compatibility & Care
To ensure optimal performance, shake the aerosol can vigorously for at least two minutes before use. Apply a light, uniform mist from a distance of 8-12 inches; a thin layer is sufficient to highlight imperfections.
Compatibility:
- Works with all standard automotive body fillers and stoppers.
- Safe for use over all types of 2K primers and surfacers.
- Fully compatible with standard abrasive grits from 80 up to 600+.
Care:
- Store in a cool, dry place to prevent moisture clumping inside the can.
- After use, invert the can and spray for 2-3 seconds to clear the nozzle and prevent clogging of the aerosol valve.