Draper Tyre Changer with Assist Arm and Wheel Balancer Kit - 02152
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for mechanics, automotive enthusiasts, and anyone needing to service wheels professionally. The Draper Tyre Changer with Assist Arm and Wheel Balancer Kit offers efficient tyre changing and balancing capabilities, suitable for a range of wheel sizes. A key benefit is the semi-automatic functionality, enhancing the speed and ease of servicing. However, users should note the kit's suitability for passenger and light goods vehicle (LGV) wheels and tyres only.
All features
| Model Part Number | 02152 |
|---|---|
| Brand | Draper |
Extended Product Information
FAQs
What type of wheels can this kit handle?
The tyre changer handles wheels from 3" to 26" (internal locking) and 12" to 25" (external locking). The balancer is suitable for passenger and LGV wheel/tyre combinations, up to 24" in diameter and 65kg.
What power supply is required?
Both units operate on standard 13 amp plugs.
What air pressure is needed?
The pneumatic supply should provide between 80-115psi.
How accurate is the wheel balancer?
The wheel balancer has an accuracy of 1 gram.
Are alloy rim protectors included?
Yes, alloy rim protectors are included in the accessory kit.
What is the balancing cycle time?
The cycle time for the wheel balancer is approximately 8-10 seconds.
What are the dimensions of the package?
This information is not available in the provided product data.
Is training required to use the equipment?
While not always required, professional training is recommended for the best results and safe operation.
Troubleshooting
Tyre changer won't operate.
Check the power supply, ensure the air compressor is supplying sufficient pressure (80-115psi), and verify the safety switch is engaged.
Wheel balancer readings are inaccurate.
Calibrate the balancer according to the user manual instructions and ensure the wheel is correctly mounted and centered.
Tyre bead won't break.
Ensure the bead breaker is properly positioned and that sufficient air pressure is applied. Check for any obstructions.
Wheel clamping issues.
Make sure the clamping jaws are clean and free of debris. Inspect for wear and tear and replace if necessary.
Pros and Cons
Pros
- Efficient tyre changing and balancing.
- Suitable for a wide range of wheel sizes.
- Assist arm simplifies handling low-profile and run-flat tyres.
- High balancing accuracy.
- Includes essential accessories.
- Operates on standard 13 amp plugs.
Cons
- Limited to passenger and LGV wheel/tyre combinations.
- Requires a pneumatic supply (80-115psi).
- May require professional installation and training for optimal use.
- Cycle time for balancing is 8-10 seconds, which could be slow for high-volume operations.
- Requires regular maintenance to ensure longevity.
Setup, Compatibility & Care
Setup
The kit requires a stable, level surface for installation. Connect the units to standard 13 amp plugs. Ensure a suitable pneumatic supply (80-115psi) is available for operation. Refer to the user manual for detailed setup instructions.
Compatibility
The tyre changer is compatible with wheels from 3" to 26" (internal locking) and 12" to 25" (external locking). The wheel balancer is designed for wheels up to 24" in diameter and a maximum weight of 65kg, suitable for passenger and LGV wheel/tyre combinations.
Care
- Regularly clean the equipment to remove dirt and debris.
- Lubricate moving parts as per the user manual.
- Inspect the pneumatic system for leaks and maintain proper air pressure.
- Check and replace any worn components.