Frenchic Trim Paint - Hornblower - Blue


Currently unavailable


Currently unavailable
This guide is for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and cabinetry with a durable, sophisticated finish. The key benefit is its all-in-one formulation, which simplifies the painting process by negating the need for primer or top coat. A potential caveat is that the coverage is estimated based on two coats for durability, so actual coverage may vary with application technique.
| Colour | Blue |
|---|---|
| Model Part Number | 39780694327383 |
| Brand | Frenchic |
No, Frenchic Trim Paint is an all-in-one formula that acts as a primer, paint, and sealer, so no additional primer or top coat is required.
It is suitable for interior woodwork, trims, skirting, doors, powder-coated radiators, metal, and all sorts of furniture including kitchen cupboards and built-in furniture made from wood or laminate.
A 500ml tin will cover up to 7m² with a single coat. For a more durable finish, two coats are recommended, so expect to cover approximately 3.5m².
Yes, the paint is EN71-3 certified, making it safe for use on children's toys.
Clean up spills and brushes immediately with water. Once cured, the surface can be wiped clean with a damp cloth.
It provides a soft-satin sheen, which is a modern and elegant finish that is also robust and scuff-resistant.
No, it is water-based with low VOCs and low odour, making it pleasant to use indoors.
Ensure the surface was clean, dry, and free from grease. For very glossy surfaces, a light sanding may be necessary to improve grip.
Apply thinner coats and use a good quality brush or roller. Allow adequate drying time between coats. Ensure paint is stirred well.
A second coat is recommended for full colour depth and durability. Ensure the paint was thoroughly mixed before application.
Stir the paint very thoroughly. If absolutely necessary and if recommended by the manufacturer (check tin), a *very* small amount of water might be added, but this can affect durability.
Preparation: Ensure surfaces are clean, dry, and free from grease or loose material. Lightly sanding glossy surfaces can improve adhesion. No primer or sealer is required.
Application: Stir the paint thoroughly before use. Apply using a good quality brush or roller. Two thin coats are recommended for maximum durability and depth of colour. Allow adequate drying time between coats (typically 1-2 hours, but check tin for specifics).
Compatibility: Suitable for interior woodwork, trims, skirting, doors, powder-coated radiators, metal surfaces, and furniture made from wood or laminate. It is safe for use on children's toys.
Care: Clean up spills and brushes immediately with water. Once fully cured, the finish is durable and can be wiped clean with a damp cloth. Avoid abrasive cleaners.