SikaBond 5500S Rigid Wood Flooring Adhesive - SIKA - 5055047210177
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide provides essential information for users of SikaBond 5500 S, a rigid, solvent-based adhesive designed for bonding wood block parquet and engineered boards. Ideal for both new installations and refurbishment projects, SikaBond 5500 S offers excellent adhesion to various wood types. However, users should be aware that proper surface preparation is crucial for optimal results. This guide covers key features, performance, usage instructions, and troubleshooting tips to ensure successful application.
All features
| Model Part Number | 5055047210177 |
|---|---|
| Brand | Sika |
Extended Product Information
FAQs
What is the coverage rate of SikaBond 5500 S?
Coverage rates vary depending on the subfloor, the notched trowel size used, and the type of flooring. Refer to the product data sheet for specific information.
Can I use SikaBond 5500 S on a plywood subfloor?
SikaBond 5500 S is designed for porous substrates such as cement, anhydrite, and pored asphalt. For plywood subfloors, consult Sika's recommendations for appropriate surface preparation and product selection.
What type of trowel should I use?
Use a notched trowel recommended by Sika for the specific flooring type and adhesive application. Check the product data sheet for specific recommendations.
How long does SikaBond 5500 S take to dry?
Drying and curing times depend on environmental conditions (temperature, humidity), the substrate, and the specific application. Allow the adhesive to fully cure before exposing the flooring to heavy traffic or placing furniture. Refer to the product data sheet for details.
Is SikaBond 5500 S suitable for exterior use?
No, SikaBond 5500 S is designed for interior use only.
How should I store SikaBond 5500 S?
Store the adhesive in a cool, dry place, away from direct sunlight and extreme temperatures. Follow the manufacturer's storage instructions on the product packaging.
Troubleshooting
Flooring is not adhering properly.
Ensure the subfloor was properly prepared, clean, and free from contaminants. Check for sufficient adhesive coverage and ensure the adhesive is compatible with the flooring type. Verify the adhesive's expiration date.
Adhesive is difficult to spread.
Make sure you're using the correct notched trowel size as per the manufacturer's instructions. Ensure the adhesive is within its use-by date and has been stored correctly. If the adhesive is too cold, allow it to warm to room temperature before use.
Adhesive takes too long to dry.
Verify that the subfloor is not too cold or humid. Ensure adequate ventilation during the drying/curing process.
Uneven flooring surface.
Ensure the subfloor is level before applying the adhesive and installing the flooring. Check flooring for any damage before installing.
Pros and Cons
Pros
- Excellent adhesion to all wood types
- Suitable for refurbishment projects, including those with bitumen adhesive residue
- Compatible with underfloor heating systems
- Easy to apply due to good spreadability
Cons
- Requires proper surface preparation for optimal bonding
- Solvent-based, which may require adequate ventilation
- May require more effort to remove than some other adhesives if needed
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the subfloor is clean, dry, and free from loose particles, dust, and any contaminants. Any existing bitumen adhesive residues should be assessed and, if necessary, prepared according to Sika's recommendations.
- Application: Apply the adhesive evenly to the subfloor using a notched trowel, following the manufacturer's recommended notch size. Ensure proper coverage to achieve a strong bond.
- Flooring Installation: Place the wood flooring into the wet adhesive, ensuring proper alignment and spacing. Follow the flooring manufacturer's instructions for fitting.
- Curing: Allow the adhesive to fully cure according to the manufacturer's instructions before exposing the flooring to heavy traffic or placing furniture.
Compatibility:
- Compatible with most wood block parquet and engineered wood flooring.
- Suitable for use on cement, anhydrite, and pored asphalt subfloors.
- Can be used with underfloor heating systems.
Care:
- Protect the freshly installed flooring from heavy traffic and direct sunlight during the curing period.
- Clean up any adhesive spills immediately with an appropriate solvent.
- Follow the flooring manufacturer's care and maintenance recommendations for cleaning and upkeep.