Ocean and Earth Surfboard Repair Resin Kit - 1oz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Ocean and Earth Surfboard Repair Resin Kit is designed for surfers who need to quickly and effectively repair minor dings on their epoxy surfboards. Its key benefit is the less hazardous, environmentally friendly Solarcure formula that cures faster with sunlight, offering a strong, durable fix. A potential caveat is that it's specifically formulated for epoxy boards and may not be suitable for other types. The kit includes 1oz of fiberglass-impregnated resin, fiberglass cloth, sandpaper, and an applicator, all designed for ease of use and effective repairs.
All features
| Model Part Number | 00356930 |
|---|---|
| Brand | Ocean and Earth |
Extended Product Information
FAQs
What type of surfboards can I use this kit on?
This kit is specifically designed for epoxy surfboards. It may not be suitable for polyurethane (PU) or other types of surfboard construction.
How long does the resin last?
The Solarcure resin in this kit has an endless shelf life, meaning it will not expire if stored correctly in a cool, dry place with the cap sealed.
Do I need a special light to cure the resin?
The kit includes solar film which works with direct sunlight. You can also use a UV lamp for faster curing, especially if sunlight is not available.
How large of a ding can this kit repair?
The 1oz quantity is best suited for small to medium dings, cracks, or shallow punctures. For very large repairs, you may need multiple kits or a professional repair.
Can I use this resin on a surfboard with a wooden deck?
While the resin is strong, its primary compatibility is with epoxy surfboard constructions. It's best to confirm with the manufacturer or test on an inconspicuous area if unsure about mixed materials.
What is the main advantage of the Solarcure formula?
The main advantage is that it's less hazardous, environmentally friendly, contains no Styrene or VOC compounds, and cures faster with solar exposure compared to traditional resins.
Is the cured resin smooth enough for surfing immediately?
After curing, the repair may be slightly raised or rough. You will likely need to sand it smooth to match the board's contours for optimal performance and aesthetics.
Troubleshooting
Resin not curing or curing slowly
Ensure the repair area is exposed to direct sunlight or a UV lamp. Check that the solar film is correctly placed over the repair. Thicker applications may take longer to cure.
Resin is too thick to apply
This is typically due to the fiber-filled nature. Ensure it's at room temperature. Gentle warming might help, but avoid overheating.
Repair area feels weak after curing
Ensure the ding was properly cleaned and the surrounding area was abraded for adhesion. The fiberglass cloth might not have been fully saturated with resin. For larger dings, multiple layers might be necessary.
Resin sticking to tools or fingers
Clean tools and skin immediately with soap and water. Wear gloves during application to prevent skin contact.
Pros and Cons
Pros
- Environmentally friendly and less hazardous formula
- Quick curing time with solar exposure
- Long shelf life ensures product readiness
- Provides strong and durable repairs
- Easy cleanup with soap and water
- Airline safe for travel
Cons
- Specifically designed for epoxy surfboards; may not be suitable for PU or other materials.
- Small quantity (1oz) may be insufficient for very large or multiple repairs.
- Requires sunlight or a UV lamp for optimal curing speed.
- Sandpaper grit may not be suitable for all finish requirements.
Setup, Compatibility & Care
Compatibility: This kit is specifically formulated for epoxy surfboards. Ensure your surfboard is made of epoxy resin before use, as it may not bond correctly or could damage polystyrene foam cores.
Setup:
- Clean the Ding: Thoroughly clean the damaged area, removing any loose material or debris.
- Prepare Surface: Use the provided sandpaper to lightly abrade the edges of the ding and the surrounding area to ensure good adhesion.
- Cut Fiberglass: Cut a piece of the fiberglass cloth slightly larger than the damaged area.
- Apply Resin: Apply a small amount of resin using the applicator. Spread it evenly over the ding and the fiberglass cloth. Place the cloth over the ding and saturate it with more resin.
- Cure: Place the solar film over the repair area and expose it to direct sunlight or a UV lamp. The resin will cure rapidly.
- Finish: Once cured, lightly sand the repaired area to smooth any rough edges.
Care: Store the kit in a cool, dry place away from direct sunlight. The resin has an endless shelf life but should be kept sealed when not in use. Clean the applicator and any tools with soap and water immediately after use.