Liberon Superior Danish Oil - 1 Litre
Not Available
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Superior Danish Oil is designed for woodworkers and DIY enthusiasts seeking to protect and enhance both interior and exterior timber. Its key benefit is providing a durable, satin-to-gloss finish that nourishes wood and highlights its natural grain, while offering resistance to water, heat, and alcohol. A potential caveat is that achieving the desired sheen may require multiple coats and proper application technique.
All features
| Model Part Number | 014643 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
How many coats of Liberon Superior Danish Oil should I apply?
For optimal protection and finish, apply a minimum of 2-3 coats, allowing each coat to dry thoroughly and wiping off excess before applying the next. Some applications may benefit from more coats for a deeper finish.
Can I use this oil on kitchen worktops?
Yes, Liberon Superior Danish Oil is suitable for kitchen worktops. Its resistance to water, heat, and alcohol makes it a practical choice, but regular maintenance is advised.
Will this oil change the colour of my wood?
The oil enhances the natural colour of the wood, often deepening it slightly and bringing out the grain. It's recommended to test on an inconspicuous area first to see the exact effect on your specific wood type.
How long does the oil take to dry?
The oil is quick-drying, typically requiring 6-8 hours between coats. For best results, allow overnight drying before applying subsequent coats or using the finished item.
Can I apply this over existing varnish or paint?
No, this oil is designed for bare wood or previously oiled/waxed surfaces. It cannot be applied over varnish or paint. Existing finishes must be completely removed.
Is this product suitable for outdoor use?
Yes, it is suitable for both interior and exterior use, offering UV protection to help prevent discolouration from the sun. For heavily exposed exterior items, additional protection might be considered.
How should I dispose of cloths used with Danish oil?
Cloths used with Danish oil can be a fire hazard due to spontaneous combustion. Soak them thoroughly in water and lay them flat to dry outdoors, or seal them in a metal container filled with water before disposal according to local regulations.
Troubleshooting
Uneven finish or blotchiness
Ensure the wood surface is uniformly prepared and that all excess oil is thoroughly wiped off after each application. Apply in thin, even coats and allow adequate drying time.
Sticky or tacky surface after drying
This indicates that too much oil was applied or excess was not removed properly. Buff the surface vigorously with a clean cloth. If the problem persists, lightly sand the affected area and reapply a thin coat, ensuring all excess is wiped off.
Dull finish
The surface may require additional coats or more vigorous buffing. For a glossier finish, apply more thin coats and buff thoroughly after each coat dries.
Oil not penetrating the wood
Ensure the wood surface is not sealed or previously finished. If it is bare wood, it should absorb the oil. For very dense hardwoods, longer penetration times or slightly warmer conditions may be beneficial. Test on a small, inconspicuous area.
Pros and Cons
Pros
- Provides excellent protection against common household spills and environmental factors.
- Enhances the natural beauty and grain of wood effectively.
- Suitable for a wide range of wood types and applications (interior/exterior).
- Quick-drying formula saves time during application.
- Offers UV protection to prevent fading.
Cons
- Achieving a high-gloss finish may require significant buffing and multiple coats.
- Application requires care to avoid blotchiness, especially on porous woods.
- Not suitable as a primary finish for heavily exposed outdoor furniture without additional topcoats.
- Requires proper ventilation during application due to oil-based nature.
- Can darken some woods more than expected; test on an inconspicuous area first.
Setup, Compatibility & Care
Setup & Application:
- Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. If necessary, sand the surface smooth. For bare wood, a final sanding with 240-grit sandpaper is recommended.
- Stir the oil thoroughly before use. Do not shake.
- Apply a liberal coat of oil using a clean, lint-free cloth or brush, working it well into the wood grain.
- Allow the oil to penetrate for 15-30 minutes.
- Wipe off any excess oil that has not been absorbed by the wood using a clean, lint-free cloth. If the wood appears to be absorbing oil rapidly, reapply a coat and continue wiping off excess.
- Allow to dry for at least 6-8 hours (or overnight for best results).
- Apply further coats following steps 3-6, lightly sanding with fine-grit sandpaper (320-grit or higher) between coats if a smoother finish is desired.
Compatibility:
- Suitable for all types of wood, including hardwoods and softwoods.
- Ideal for furniture, doors, tabletops, worktops, kitchen cabinets, and exterior woodwork like garden furniture and sheds.
- Can be used on previously oiled or waxed surfaces after thorough cleaning and preparation.
- Not recommended for use on laminate or veneer surfaces without extensive testing.
Care:
- Clean spills immediately with a damp cloth.
- For routine cleaning, use a soft, damp cloth. Avoid abrasive cleaners or excessive water.
- For maintenance and to refresh the finish, apply a thin coat of Liberon Superior Danish Oil annually or as needed, following the application steps.