Telemecanique Sensors M12 4-Pin Connector - XZCC12FDM40B
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Telemecanique Sensors XZCC12FDM40B is a robust, IP67-rated circular connector designed for industrial applications requiring reliable data transmission. It is ideal for users who need a durable, M12-standard connection for cables up to 7mm in outer diameter, offering a secure connection for sensors and control systems. While highly reliable, its 3A current and 125V voltage rating may limit its use in high-power applications.
All features
| Model Part Number | XZCC12FDM40B |
|---|---|
| Brand | Telemecanique Sensors |
Extended Product Information
FAQs
What does IP67 rating mean for this connector?
An IP67 rating indicates that the connector is dust-tight and protected against the effects of temporary immersion in water up to 1 meter deep for 30 minutes.
Can this connector be used for high-power applications?
No, this connector has a nominal current rating of 3A and a nominal voltage of 125V. It is best suited for signal transmission and low-power data communication, not for powering high-draw machinery.
What is the thread size of this M12 connector?
The thread size is a standard metric 12 (M12).
How many pins does this connector have?
This connector features 4 data contacts (pins).
What is the maximum wire size this connector can accommodate?
It can be connected to conductors with a cross-section of 0 to 0.75mm².
Is this connector suitable for outdoor use?
Yes, its IP67 rating makes it highly suitable for outdoor applications where exposure to dust and water is expected.
What type of connector is this (male/female)?
This is a socket (female) end connector designed for cable mounting.
Troubleshooting
Connector does not power up or transmit data.
Verify that the mating connector is securely attached and properly seated. Check wiring connections within the connector and at the device end. Confirm the system voltage and current do not exceed the connector's 125V/3A rating. Ensure the correct pins are connected.
Intermittent connection or signal loss.
Inspect the connector and its mating surfaces for any dirt, moisture, or damage that could interfere with contact. Ensure the cable clamp is tight and the cable is not stressed. Re-seat the connector firmly.
Connector fails to maintain a watertight seal.
Ensure the cable outer diameter is within the specified range (approx. 7mm). Check that the cable gland/seal is properly tightened around the cable. Inspect the sealing O-rings for damage or wear.
Pros and Cons
Pros
- High durability and resistance to environmental factors (IP67).
- Standard M12 interface ensures broad compatibility.
- Secure connection prevents accidental disconnections.
- Suitable for both signal and low-power data transmission.
- Easy cable mounting with female socket design.
Cons
- Limited to 3A current, not suitable for high-power devices.
- Voltage rating of 125V restricts its use to low-voltage applications.
- Specific to 4-pin configuration, may not fit all systems.
- Requires appropriate mating connector for full functionality.
Setup, Compatibility & Care
Setup:
- Prepare the cable end by stripping the wires according to the conductor cross-section specification (0 to 0.75mm²).
- Connect the stripped wires to the corresponding pins within the female socket of the XZCC12FDM40B connector.
- Ensure the cable is securely inserted and the connector housing is properly sealed around the cable (up to 7mm outer diameter).
- Mate the connector with a compatible M12 male connector.
Compatibility:
- Compatible with standard M12 male connectors.
- Designed for cables with an outer diameter of approximately 7mm.
- Suitable for applications requiring IP67 environmental protection.
Care:
- Clean the connector exterior with a dry or slightly damp cloth. Avoid harsh chemicals.
- Periodically inspect the connector and mating surfaces for debris or damage.
- Ensure the sealing surfaces are clean before mating to maintain IP67 integrity.