Rust-Oleum Bathroom Wall & Ceiling Paint - Emerald - 2.5L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps you effectively use Rust-Oleum Bathroom Wall & Ceiling Paint - Emerald - 2.5L. Designed for bathroom walls and ceilings, this water-resistant paint provides a beautiful, modern, matt finish and is easy to clean. However, it's not suitable for shower enclosures or areas in constant contact with water. This guide will help you achieve the best results with your paint project.
All features
| Colour | Green |
|---|---|
| Brand | Rust-Oleum |
Extended Product Information
FAQs
How much area does a 2.5L tin cover?
A 2.5L tin covers approximately 12m².
Can I use this paint in a shower?
No, this paint is not suitable for shower enclosures or areas in constant contact with water.
How many coats of paint are needed?
For best results, apply two coats.
How do I clean the painted surface?
Use a damp cloth to wipe the surface. This paint is scrubbable and easy to clean.
What kind of finish does this paint have?
It has a modern matt finish.
What is the drying time between coats?
Allow sufficient drying time between coats, as specified on the product label.
What surfaces can I apply this paint to?
You can apply it to bare plaster, brick, concrete, and previously painted walls.
What is the warranty?
The paint resists cracking, peeling, and blistering for up to 6 years when applied correctly.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared, clean, and free from contaminants. Lightly sand glossy surfaces for better adhesion.
Paint finish is uneven.
Apply the paint evenly using a brush or roller, avoiding excessive pressure. Ensure two coats are applied for complete coverage.
Paint is peeling or blistering.
Ensure the paint is applied according to the instructions. Check for moisture issues behind the paint.
Pros and Cons
Pros
- Water-resistant formula ideal for bathrooms.
- Provides a modern matt finish.
- Easy to apply with brush or roller.
- Easy to clean and maintain.
- Long-lasting and durable.
- Available in a wide range of colours.
Cons
- Not suitable for shower enclosures or areas in constant contact with water.
- Requires two coats for best results.
- Coverage is 12m² per litre, which may require multiple tins for larger bathrooms.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, dirt, grease, and wallpaper.
- Application: Stir the paint thoroughly before use. Apply two coats with a brush or roller, allowing sufficient drying time between coats.
- Drying Time: Allow the paint to dry completely before exposing it to high humidity or cleaning.
- Cleaning: Clean up spills and splatters immediately with water. For general cleaning, use a damp cloth.
- Compatibility: This paint is compatible with bare plaster, brick, concrete, and previously painted walls. Do not use in shower enclosures or areas with constant water contact.