Trimits Fabric Paint Pen - Mint Green

Currently unavailable

Currently unavailable
This Trimits Fabric Paint Pen in Mint Green is designed for artists and crafters looking to add detailed, colorful designs to fabric projects. Its key benefit is providing precise application for both writing and drawing on various textiles. A potential caveat is that effective heat setting is required for washability.
| Brand | Trimits |
|---|
Drying time can vary depending on the fabric type and thickness of the application, but it's generally recommended to allow at least 24 hours before heat setting.
Yes, the paint can be used on dark fabrics, but the vibrancy may be affected. It is always best to test on a small, inconspicuous area first to see the color payoff.
Once dry, place a protective cloth or baking paper over the painted design and iron on a medium setting (no steam) for 3-5 minutes. Ensure the entire design is covered during the ironing process.
If the nib becomes clogged with dried paint, gently wipe it with a slightly damp cloth. Avoid soaking the nib or using harsh cleaning agents.
It is generally not recommended to paint over existing designs, especially if they are not fabric paints, as it may affect adhesion and washability.
When stored correctly (horizontally with the cap tightly secured), the paint pen should remain usable for an extended period. Discard if the ink consistency changes significantly or it no longer flows.
The product information indicates it is water-based, which generally implies it is safer for use. However, always refer to specific product labeling for detailed safety information.
Shake the pen vigorously. Press the nib down on a protected surface for a few seconds to re-initiate ink flow. Ensure the cap was securely on when not in use.
Ensure the fabric is taut and not stretched. Try using on a smoother fabric or consider pre-washing the fabric to remove sizing. Test on a scrap piece first.
The design was likely not properly heat set. Ensure the paint was completely dry before ironing and that the ironing process (temperature, duration, protective cloth) was followed correctly.
Gently try to wipe the tip with a damp cloth. If the issue persists, refer to the FAQs regarding cleaning the nib.
Setup: Shake the pen well before use. Press the nib down on a flat surface for a few seconds to start the ink flow. It's recommended to test the pen on a scrap piece of fabric or paper first to ensure smooth ink delivery.
Compatibility: This fabric paint pen is suitable for most natural and synthetic fabrics. It works well on cotton, linen, denim, silk, and polyester blends. Avoid using on very loosely woven or excessively textured fabrics where the ink may bleed or not adhere evenly.
Care: After the paint has dried completely (allow at least 24 hours), heat set the design by ironing the fabric on a medium setting (without steam) for approximately 3-5 minutes. Place a piece of cloth or baking paper between the iron and the painted area. Once heat-fixed, the fabric can be washed at up to 40°C. Store the pen horizontally with the cap tightly secured to prevent drying out.