Maypole Power Pack Jump Starter - 16,000mAh / 500A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Maypole Power Pack Jump Starter (MP7441) is designed for drivers who need reliable roadside assistance for 12V vehicles. Its primary benefit is safely jumpstarting dead batteries in petrol engines up to 7.0L and diesel engines up to 3.5L, offering up to 35 jumpstarts from a full charge. A potential caveat is the need to ensure the device is adequately charged before use, especially for larger engine types. This portable and lightweight power bank also functions as a versatile device charger and includes an LED flashlight.
All features
| Model Part Number | MP7441 |
|---|---|
| Brand | Maypole |
Extended Product Information
FAQs
How many times can I jumpstart a car with a full charge?
The Maypole MP7441 can provide approximately 35 jumpstarts from a full charge, depending on battery condition and engine size.
What is the charging time for the jump starter?
Charging time varies with the power source. Using a USB-C PD30W charger, it can be recharged significantly faster than standard chargers. Specific times depend on the charger's output.
Can this jump starter be used in very cold weather?
While it can be used in cold weather, battery performance is reduced in low temperatures. It is recommended to store the unit in a warmer place if possible before use in extreme cold for optimal performance.
What protection features does the smart cable technology offer?
The smart cable safety technology includes protection against low voltage, reverse polarity, short circuits, overload, over-discharge, and over-temperature.
How do I know when the jump starter is fully charged?
The large digital screen on the power pack will display the charging status and indicate when the battery is at 100%.
Can I use this to charge my laptop?
The USB-C port supports PD30W output, which may be sufficient for some laptops. However, compatibility depends on the laptop's charging requirements. It is primarily designed for smaller electronic devices like smartphones and tablets.
What is the warranty period for this product?
Information regarding the specific warranty period is typically found on the product packaging or the manufacturer's official website. Please refer to your purchase documentation.
Troubleshooting
Device does not turn on.
Ensure the device is charged. Connect to a power source using the USB-C cable and check if the display indicates charging.
Jumpstarter fails to start the vehicle.
Verify that the clamps are securely connected to the correct battery terminals (red to positive, black to negative/ground). Ensure the device has sufficient charge. Check the vehicle's battery condition and fuses.
LED flashlight not working.
Check if the device has power. If the battery is low, the flashlight may not function. Recharge the unit.
USB devices not charging.
Ensure the USB cable is properly connected. Try a different USB cable. Confirm that the jump starter unit has sufficient battery charge.
Smart cable safety indicator lights flashing.
This indicates a safety protection is active. Disconnect the clamps immediately and re-read the connection instructions. Ensure correct polarity and check for any short circuits or low voltage.
Pros and Cons
Pros
- Suitable for a wide range of petrol and diesel engines.
- Provides multiple jumpstarts from a single charge.
- Offers fast charging capabilities via USB-C PD.
- Includes essential safety protections for user and vehicle.
- Portable and lightweight design for convenience.
- Dual functionality as a jump starter and power bank.
Cons
- Requires sufficient charge for optimal performance, especially on larger engines.
- Maximum capacity may not be sufficient for extremely large diesel engines or multiple starts in rapid succession.
- USB-A output current is limited to 3A, which may be slow for some modern devices.
Setup, Compatibility & Care
Setup: Ensure the power pack is fully charged before first use. Connect the smart jump leads to the power pack, then connect the red clamp to the positive (+) terminal of the dead battery and the black clamp to the negative (-) terminal or a suitable grounding point on the vehicle's chassis. Attempt to start the vehicle. Once started, disconnect the clamps in reverse order (black first, then red).
Compatibility: Suitable for all 12V batteries. Recommended for petrol engines up to 7.0L and diesel engines up to 3.5L.
Care: Store the power pack in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Recharge the unit regularly (ideally every 3-6 months) to maintain battery health, even if not in use. Clean the exterior with a dry or slightly damp cloth; avoid using solvents or abrasive cleaners. Ensure the jump leads and clamps are kept clean and free from corrosion.