Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
This guide is for homeowners and renovators looking to enhance their kitchen's aesthetics and functionality with a durable and stylish splashback. The key benefit is transforming your kitchen with a customisable, easy-to-clean, and heat-resistant glass surface. A potential caveat is the need for precise measurements during installation. This product offers a premium solution for protecting kitchen walls from splashes and spills while adding a personalised touch through customisable designs.
| Model Part Number | 60 X 60Cm Floating Space 6mm |
|---|---|
| Brand | Choose Your Print |
Yes, the splashback is designed for simple installation. However, ensure you measure accurately and use the correct adhesive. If you are unsure, professional installation is recommended.
Yes, the toughened glass is heat-resistant and impact-resistant, making it suitable for use behind cooking surfaces. Ensure adequate ventilation as per local building codes.
Wipe with a damp cloth and mild detergent for daily cleaning. For tougher spots, glass cleaner or a water/vinegar solution works well. Avoid abrasive materials.
The splashbacks are available in several standard sizes, including 600x600mm, 600x650mm, 600x750mm, 700x650mm, 700x750mm, 900x650mm, and 900x750mm.
Yes, a key feature is the ability to choose from a wide variety of prints, patterns, or upload your own design to create a truly unique splashback.
Use a high-strength, non-acidic adhesive specifically designed for glass and suitable for kitchen environments. Always refer to the adhesive manufacturer's instructions for application and curing times.
The splashback is made from toughened glass, which significantly increases its strength and resistance to impact and heat compared to standard glass. However, it should still be handled with care during installation.
Ensure the wall surface is clean, dry, and free from dust or grease. Use a high-quality adhesive specifically designed for glass splashbacks and follow application instructions carefully. Verify the adhesive has fully cured before normal use.
Inspect the splashback upon arrival. For minor blemishes that appear during cleaning, ensure you are using non-abrasive cloths and cleaners. If the issue is persistent or was present on arrival, contact customer support.
This product is designed for direct installation without cutting or drilling. Any modifications should be performed by experienced glass professionals to avoid breakage and ensure safety.
This can occur if the adhesive was not applied evenly or if the splashback was not pressed firmly against the wall. Carefully remove the splashback if possible, reapply adhesive evenly, and press firmly to eliminate air pockets.
Setup:
Compatibility:
Care:
