Phoenix Contact Wire End Sleeve - AI-TWIN2X 0.75-10 GY
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Phoenix Contact 3200975 is an insulated twin bootlace wire ferrule designed for professionals crimping two conductors simultaneously. Its key benefit is providing a neat, secure termination for paired wires, streamlining electrical connections. A potential caveat is its specific compatibility with 2 x 0.75mm² conductors.
All features
| Model Part Number | 3200975 |
|---|---|
| Brand | Phoenix Contact |
Extended Product Information
FAQs
What is the primary use of these twin bootlace ferrules?
These ferrules are designed to terminate two conductors of 0.75mm² simultaneously into a single ferrule, providing a neat and secure connection point.
What size conductors are compatible with the Phoenix Contact 3200975?
This specific ferrule is designed for two conductors, each with a cross-sectional area of 0.75mm².
Do I need a special tool to crimp these ferrules?
Yes, a compatible crimping tool designed for twin bootlace wire ferrules is required for proper and secure crimping.
What material is the ferrule made from?
The ferrule itself is made from tin-plated copper, and it features an insulating polypropylene plastic sleeve.
How many ferrules are included in a pack?
Each pack contains 100 pieces of the Phoenix Contact 3200975 ferrule.
What is the sleeve length of this ferrule?
The sleeve length is 10 mm.
Is this product compliant with environmental regulations?
Yes, the product is RoHS compliant.
Troubleshooting
Ferrule does not crimp securely.
Ensure you are using a compatible crimping tool specifically designed for twin bootlace ferrules. Verify the tool is properly adjusted and that the ferrule is fully inserted before crimping.
Conductors are difficult to insert.
Ensure the wire strands are neatly twisted and not frayed. Confirm that the conductors are indeed 0.75mm²; larger wires will not fit correctly.
Insulation sleeve is damaged during crimping.
Check the crimping tool for any sharp edges. Ensure the ferrule is positioned correctly within the tool's die to avoid damaging the plastic sleeve.
Poor electrical connection after crimping.
Re-examine the crimp. A loose or uneven crimp can lead to poor conductivity. Ensure the crimping tool has applied sufficient pressure.
Pros and Cons
Pros
- Efficiently terminates two conductors in one step.
- Provides a professional and secure wire connection.
- Insulated sleeve enhances electrical safety.
- Durable construction with tin-plated copper.
- Clear color-coding for easy identification.
Cons
- Limited to specific wire sizes (2 x 0.75mm²).
- Requires a compatible crimping tool.
- Not suitable for single-conductor applications.
- Bulk packing might be excessive for very small jobs.
Setup, Compatibility & Care
Setup:
- Strip the ends of two 0.75mm² conductors to the appropriate length (typically around 10mm).
- Insert both stripped conductors fully into the ferrule's opening.
- Ensure the conductors are evenly inserted and aligned within the ferrule.
- Using a compatible crimping tool designed for twin ferrules, crimp the ferrule firmly onto the conductors. Ensure the crimp is secure and even.
Compatibility:
- Wire Size: Designed for two conductors, each with a cross-sectional area of 0.75mm².
- Crimping Tool: Requires a specialized crimping tool that can accommodate and properly crimp twin bootlace ferrules.
Care:
- Store in a dry environment to prevent corrosion of the copper.
- Keep the insulating sleeve clean and free from contaminants.
- Avoid exposing the ferrules to extreme temperatures or harsh chemicals.