JT Premium Drive Belt For Daelim B-BONE 125 2011-2015 - JTB8201
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JT Premium Drive Belt (JTB8201) is designed for Daelim B-BONE 125 owners seeking a reliable, high-performance replacement part for their scooter's CVT system. Ideal for daily commuters looking to maintain original equipment power transfer, this belt offers enhanced durability and precise fitment; however, users should ensure they are comfortable with basic mechanical disassembly to perform the installation correctly.
All features
| Model Part Number | JTB8201 |
|---|---|
| Brand | JT |
Extended Product Information
FAQs
Is this belt compatible with other Daelim models?
No, the JTB8201 is specifically engineered for the Daelim B-BONE 125 models manufactured between 2011 and 2015.
Do I need special tools to install this belt?
Yes, a variator locking tool is typically required to safely remove the pulley nut without damaging the crankshaft or housing.
How often should I replace my drive belt?
Refer to your Daelim owner's manual for specific mileage intervals, though it is recommended to inspect it every 3,000 to 5,000 miles.
Does this belt require a break-in period?
It is recommended to ride gently for the first 50 miles to allow the belt to seat correctly into the pulley grooves.
Can I use belt dressing to stop squealing?
No, never apply belt dressing to a CVT belt, as it will cause slipping and contaminate the transmission components.
Troubleshooting
Slippage during acceleration
Check that the pulley faces are clean and free of grease or oil; ensure the belt is properly seated.
Belt noise or squealing
Verify the belt tension is correct and check for any misalignment in the variator or rear clutch assembly.
Reduced top speed
Inspect the variator rollers for flat spots or wear, as these often contribute to performance loss alongside a new belt.
Pros and Cons
Pros
- Manufactured to exact OEM specifications
- High-durability material construction
- Direct fit for Daelim B-BONE 125
- Ensures smooth CVT engagement
Cons
- Requires mechanical knowledge for installation
- Compatibility limited strictly to specified Daelim models
- CVT system may require cleaning before installation
Setup, Compatibility & Care
Compatibility: This drive belt is exclusively designed for the Daelim B-BONE 125 (2011-2015).
Installation Steps:
- Remove the CVT cover to access the transmission housing.
- Use a variator locking tool to secure the pulley, then loosen the nut.
- Carefully compress the rear pulley to create slack, then remove the old belt.
- Install the new JTB8201 belt, ensuring it follows the original directional path.
- Reassemble and verify the belt is tensioned correctly before starting the engine.
Care: Periodically inspect the belt for fraying or cracking during your standard oil change intervals. Keep the CVT housing free of debris and moisture to maintain the integrity of the belt materials.