G.Skill Aegis DDR4 Memory - 32GB - 2x16GB - 3000MHz - CL16 - F4-3000C16D-32GISB

The G.SKILL Aegis 32GB DDR4 3000MHz RAM kit delivers reliable performance for gaming and multitask...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

The G.Skill Aegis 32GB DDR4 3000MHz memory kit is designed for gamers and power users looking to enhance system stability and performance during intensive tasks like gaming or multitasking. Offering 32GB of capacity across two modules, this kit provides a significant boost for modern desktop PCs through Intel XMP 2.0 support and efficient power usage; however, users should ensure their motherboard BIOS is updated and compatible to achieve the full rated frequency.

All features

SeriesAegis
Model Part NumberF4-3000C16D-32GISB
BrandG.Skill

Extended Product Information

FAQs

Does this RAM require a specific motherboard?

It is compatible with most standard DDR4-ready motherboards, but you should check your motherboard's QVL (Qualified Vendor List) to ensure 3000MHz support.

Can I mix this with different RAM sticks?

It is highly recommended to use matching modules to avoid system instability, as mixing different speeds or timings can cause performance issues.

What is the warranty period?

G.Skill provides a limited lifetime warranty for their memory products.

Is this ECC memory?

No, this is non-ECC (error-correcting code) unbuffered memory, designed for standard consumer PCs.

Why does the RAM height matter?

The 31.2mm low-profile height is beneficial for builds using large air coolers, ensuring the RAM doesn't collide with the heatsink.

Do I need to overclock manually?

No, Intel XMP 2.0 profiles allow you to set the memory to its performance speed with a single setting change in the BIOS.

Troubleshooting

System boots, but RAM is running at 2133MHz.

Enter your BIOS settings and manually enable the Intel XMP 2.0 profile to reach the 3000MHz clock speed.

Computer fails to post or displays a memory error beep.

Remove the modules and ensure they are fully seated in the slots. Try booting with one stick at a time to identify if a specific module is faulty.

System instability or blue screens under load.

Update your motherboard BIOS to the latest version, as this often improves memory compatibility and stability.

Pros and Cons

Pros

  • Reliable dual-channel performance for gaming and productivity
  • Easy setup via Intel XMP 2.0 profiles
  • Energy-efficient operation at 1.2V-1.35V
  • Broad motherboard compatibility through rigorous G.Skill testing

Cons

  • Requires manual BIOS configuration to hit 3000MHz speeds
  • May default to lower SPD speed (2133MHz) on first boot
  • Not intended for high-end overclocking enthusiasts

Setup, Compatibility & Care

Installation is straightforward due to the standard 288-pin DIMM form factor.

  1. Ensure your PC is powered off and unplugged.
  2. Insert the modules into the appropriate DIMM slots until they click into place.
  3. Upon first boot, enter the system BIOS/UEFI.
  4. Enable the 'XMP' or 'DOCP' profile to set the RAM to its rated 3000MHz frequency.
  5. Save settings and exit.

Since this is unbuffered, non-ECC memory, it is designed for consumer PC motherboards. Keep the memory contacts clean and avoid touching them to prevent oil buildup. Always ensure your motherboard supports DDR4 speeds up to 3000MHz before purchasing.