Bond It SBR Waterproof Concrete Latex Admixture - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Bond It SBR, a premium-grade latex admixture designed to enhance the performance of concrete and cement renders. It significantly improves abrasion, chemical, and water resistance, making it ideal for various applications. While highly effective, it's crucial to follow the application instructions precisely for optimal results. This guide covers key features, usage, setup, and troubleshooting to help you get the most out of Bond It SBR.
All features
| Colour | White |
|---|---|
| Model Part Number | BDH039 |
| Brand | Bond it |
Extended Product Information
FAQs
What is the mixing ratio for the key coat?
Mix 1 part Bond It SBR to 2 parts cement by volume, and adjust to brushable consistency with water.
How do I prepare the surface before application?
All surfaces should be free from laitance, oil, grease, and standing water. Unsound surfaces should be scabbled down to a solid base material.
How many coats are recommended for damp-proofing?
Two or three coats are recommended for damp-proofing.
What should I do if the render cracks?
Ensure proper mixing ratios and allow sufficient drying time. Also, ensure the correct preparation steps were followed.
Can I use Bond It SBR on exterior surfaces?
Yes, Bond It SBR is suitable for both external and internal use applications.
How do I clean the tools after use?
Clean tools and equipment immediately after use with water.
What safety precautions should I take?
Wear appropriate protective gear, including gloves and eye protection.
How should I store Bond It SBR?
Store in a cool, dry place.
Troubleshooting
Poor adhesion of render or screed.
Ensure the substrate was properly prepared and the key coat was applied correctly. Check for any contaminants on the surface.
Cracking of render or screed.
Ensure proper mixing ratios, and allow sufficient drying time between coats.
Water penetration.
Ensure the correct number of coats has been applied and that the application method has been followed correctly.
Difficulty in application.
Ensure the product is mixed to the correct consistency by following the instructions.
Pros and Cons
Pros
- Significantly enhances the durability of concrete and cement-based materials.
- Provides excellent resistance to water and chemicals.
- Improves adhesion, making it ideal for repair and new construction.
- Suitable for both interior and exterior applications.
- Easy to apply with clear instructions.
Cons
- Requires careful preparation of the substrate for optimal performance.
- Mixing ratios must be followed precisely.
- Requires proper ventilation during application.
- May require multiple coats for damp-proofing.
- Drying times must be adhered to.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure all surfaces are clean, free from laitance, oil, grease, and standing water. Unsound surfaces should be scabbled down to a solid base material.
- Mixing: Follow the mixing ratios precisely as described in the application instructions.
- Application Tools: Use a brush, trowel, or appropriate tools based on the application method.
- Ventilation: Ensure adequate ventilation during application and drying.
Compatibility
Bond It SBR is compatible with cement-based products. Always check the compatibility with other materials before use.
Care
- Storage: Store in a cool, dry place.
- Cleaning: Clean tools and equipment immediately after use with water.
- Safety: Wear appropriate protective gear, including gloves and eye protection.